Operating instructions

2.4 Items supplied with the toolbox version
1 Combilaser
1 Soft pouch
4Batteries
1 Operating instructions
1 Universal adapter
1 Manufacturer’s certificate
1Tripod
2.5 Information displayed during operation
LED The LED doesn’t light. The tool is switched off.
The LED doesn’t light. The batteries are exhausted.
The LED doesn’t light. The batteries are inserted incorrectly.
The LED lights constantly. The laser beam is switched on. The tool
is in operation.
The LED blinks twice every
10 seconds.
The batteries are almost exhausted.
The LED blinks. The temperature of the tool is above
50°C (122°F) or below -10°C (14°F) (the
laser beam does not light).
Laser beam The laser beam blinks twice
every 10 seconds.
The batteries are almost exhausted.
The laser beam blinks rapidly. The tool cannot level itself. (outside the
5° self-leveling range).
The laser beam blinks every 2
seconds.
Thetoolisunabletolevelitselfauto-
matically (or is set to “Inclined plane”
operating mode).
3 Accessories
Designation
Short designation
Description
Tripod PMA 20
Target plate PMA 54/55
Target plate PRA 50/51
Laser receiver PMA 31
Magnetic bracket PMA 74
Telescopic brace PUA 10
Frame clamp PMA 25
Universal adapter PMA 78
Hilti toolbox PMC 46
Laser visibility glasses PUA 60 The laser visibility glasses are not
protective glasses and thus do not
protect the eyes from laser beams.
As the laser visibility glasses restrict
color vision, they should be worn only
when working with this tool. Do not
wear the laser visibility glasses while
driving a vehicle on a public road.
en
13
Printed: 11.04.2016 | Doc-Nr: PUB / 5071418 / 000 / 03