User's Manual

2.15 Charge status of the Li‑ion battery during charging while inserted in the tool
LEDs light constantly LEDs blink Charge status C
LED 1,2,3,4
-
C = 75 %
LED 1,2,3 LED 4
C ≧75%
LED 1,2 LED 3
50 % ≦ C < 75 %
LED 1 LED 2
25 % ≦ C < 50 %
-
LED 1
C < 25 %
2.16 Charge status of the Li‑ion battery during charging while not inserted in the tool
If the red LED lights constantly, the battery is being charged.
If the red LED doesn’t light, the battery is fully charged.
3. Accessories
PRA 35 remote control / laser receiver
Laser receiver PRA 38, PRA 30/31
Target plate PRA 50/51
Wall mount PRA 70/71
Slope calculator
PRA 52
Slope adapter
PRA 78
Car charging connector
PRA 86
Height transfer device
PRA 81
AC adapter
PRA 85
Battery PRA 84
Vertical angle PRA 770
Batter board receiver holder PRA 751
Batter board adapter PRA 750
Facade adapter PRA 760
Various tripods PUA 20, PUA 30, PA 921, PA 931/2
Telescopic staffs
PA 960, PUA 50, PUA 55/56
4. Technical data
Right of technical changes reserved.
PR 35
PR 35 receiving range (diameter)
Typical distance with PRA 35: 2…300 m (6...900 ft)
Range of remote control (circle diameter) Typical distance with PRA 35: 0…100 m (0...300 ft)
Accuracy 0.75 mm per 10 m horizontal distance
(77° F, ¹/₁₁" in 100 ft) at a temperature of 25°C
Plumb beam
Continuous, perpendicular to the plane of rotation
PR 35 laser class
Class 2, visible, 620-690 nm / Po < 4.85 min, ≧
300 /min (EN 60825-1:2008 / IEC 825 - 1:2008);
class II (CFR 21 § 1040 (FDA))
en
5