Compatibility Chart - NPR 32-A22 , English
DBS • 01/21
Hilti, Inc.
1-800-879-8000 | en español 1-800-879-5000
www.hilti.com
Hilti (Canada) Corporation
1-800-363-4458
www.hilti.ca
PRESS TOOL NPR 32-A22
COMPATIBILITY CHART
Hilti’s Pipe Press Tool NPR 32-A22 is compatible with the press systems below:
Hilti’s Pistol-grip Pipe Press Tool NPR 32 is compatible with the press systems below:
Pipe Press Tool NPR 32-A22
VIEGA
ELKHART-
APOLLO &
NIBCO
ELKHART-
APOLLO
Mueller
Streamline
Press
VIEGA
MegaPress PEX
ProPress
(both copper
and stainless
steel)
½” – 2”
ProPress
XL-C (copper)
2 ½” – 4”
Copper
Fittings
½” – 2”
Copper
Fittings
2 ½” – 4”
Copper
Fittings: ½”
to 4”
MegaPress,
MegaPressG,
MegaPress
CuNi
½” - 2”
PureFlow PEX
½” – 2”
Hilti NPR PS
PP Jaw
Hilti NPR PR
PP Ring and
PRA Actuator
Hilti NPR PS
PP Jaw
Hilti NPR PR
PP Ring and
PRA Actuator
Hilti NPR PS
PP Jaws,
ring and PRA
Actuator
Hilti NPR PS
MP jaws, NPR
PR MP ring
and NPR PA 2
RIDGID
Standard Jaw
RIDGID XL-C
Rings and
Actuator
RIDGID
Standard Jaw
RIDGID XL-C
Rings and
Actuator
RIDGID
MegaPress
Jaws and
Rings
RIDGID PEX
Press Jaw
#2207155
Milwaukee
M18 Jaw
Milwaukee
M18 Ring and
Actuator
Milwaukee
M18 Jaw
Milwaukee
M18 Ring and
Actuator
Milwaukee
Black Iron
Press Jaws
and Rings
The above metallic press connect systems comply to the pipe and fitting manufacturer’s recommended operating pressure of 200psi and a max burst pressure of 600psi.
The PEX fittings have been tested to the requirements of ASTM F877-18a (Section 7.6). Consult the pipe and fitting manufacturer for proper preparation and installation
procedure.
Pistol-grip Pipe Press Tool
NPR 32
VIEGA
ELKHART-
APOLLO &
NIBCO
ELKHART-
APOLLO
Mueller
Streamline
Press
VIEGA
MegaPress
ProPress (both
copper and
stainless steel)
½” – 2”
ProPress XL-C
and XL-S (both
copper and
stainless steel)
2 ½” – 4”
Copper Fittings
½” – 2”
Copper Fittings
2 ½” – 4”
Copper Fittings:
½” to 4”
MegaPress,
MegaPressG,
MegaPress CuNi
½” – 4”
Hilti NPR PS PP
Jaw
Hilti NPR PR PP
Ring and
PRA Actuator
Hilti NPR PS PP
Jaw
Hilti NPR PR PP
Ring and
PRA Actuator
Hilti NPR PS PP
Jaws, ring and
PRA Actuator
Hilti NPR PS MP
jaws, NPR PR MP
rings and NPR PA
2/ NPR PA 3
RIDGID
Standard Jaw
RIDGID XL-C
Rings and
Actuator
RIDGID
Standard Jaw
RIDGID XL-C
Rings and
Actuator
RIDGID MegaPress
Jaws and Rings
#2195303
Milwaukee M18
Jaw
Milwaukee
M18 Ring and
Actuator
Milwaukee M18
Jaw
Milwaukee
M18 Ring and
Actuator
Milwaukee Black
Iron Press Jaws
and Rings
The above metallic press connect systems comply to the pipe and fitting manufacturer’s recommended operating pressure of 200psi and a max burst pressure of 600psi.
Consult the pipe and fitting manufacturer for proper preparation and installation procedure.