Type_approval_A-60_ABS_CFS-T

ManualsBrandsHilti ManualsFirestop & Fire ProtectionCFS-T SSF transit frames

Confirmation of Product Type Approval

Company Name: HILTI AKTIENGESELLSCHAFT

Address: FELDKIRCHERSTR. 100 Liechtenstein

Product: Fire Stop System

Model(s): Hilti Cable Transit System: "CFS-T SS", "CFS-T SSF", "CFS-T RR", "CFS-T RRS", "CFS-T

SSR", "CFS-T SSR/R30", "CFS-T SSRF/R30", "CFS-T EX", "CFS-T EMC", "CFS-T RR EMC".

Certificate Type Certificate Number Issue Date Expiry Date

Product Design Assessment (PDA)

Manufacturing Assessment (MA)

Product Quality Assurance (PQA)

19-HG1826648-PDA

16-MF3186309

18-FEB-2019

10-AUG-2016

17-FEB-2024

30-AUG-2021

Tier

Intended Service

Multi cable transit systems for A-60 steel bulkhead and deck penetrations and steel / copper pipe transit

systems for A-60 steel deck and bulkhead penetrations.

Description

Modular cable and pipe transit system consisting of steel or stainless steel frames or plugs in

combination with insert blocks, made from halogen-free elastomeric rubber, as well as compression units

and anchor plates.

For technical details and data click on link "View More Details".

Ratings

Class "A60" steel bulkhead and deck penetrations.

Model SS/SSF 8x1 tested water tight at a pressure of 4.5 bar, and gas tight at a pressure of 3 bar.

Model SS-2x1 tested water tight at a pressure of 11 bar and gas tight at a pressure of 7 bar.

Filler module 60/0 tested for short term chemical resistance to natural gasoline, acc. to ISO 37 and for air

tightness (0.5 bar, 10 min.) after storage at -60°C for four days.

Degree of Protection: IP66, IP67, IP69 (TÜV SÜD, TR-46085-19369-02).

Certified safe type: II 2 GD Ex e II IP65 (TUV Sud, 71342881).

Service Restrictions

Summary of content (4 pages)

PAGE 1
Confirmation of Product Type Approval Company Name: HILTI AKTIENGESELLSCHAFT Address: FELDKIRCHERSTR. 100 Liechtenstein Product: Fire Stop System Model(s): Hilti Cable Transit System: "CFS-T SS", "CFS-T SSF", "CFS-T RR", "CFS-T RRS", "CFS-T SSR", "CFS-T SSR/R30", "CFS-T SSRF/R30", "CFS-T EX", "CFS-T EMC", "CFS-T RR EMC".
PAGE 2
Certificate Number: 19-HG1826648-PDA - Unit Certification is not required for this product. If the manufacturer or purchaser request an ABS Certificate for compliance with a specification or standard, the specification or standard, including inspection standards and tolerances, must be clearly defined. - Only to be used in the tested configurations as under "Description" above. - Not to be used for penetrations of tank boundaries. - Bundling of cables is not permitted in watertight bulkheads.
PAGE 3
Certificate Number: 19-HG1826648-PDA Drawing No. Deck 2- P 1139-17-530-4, Test Report, ZAG, 21/11/2017, Revision: -, Pages: 80 Drawing No. Deck 3- 19041A, Test Report, WarringtonFireGent, 28/06/2018, Revision: -, Pages: 56 Drawing No. WTGT CFS-T-291018-01, Test Report, Water-/ Gas tightness, Hilti, 29/10/2018, Revision: -, Pages: 4 Drawing No.
PAGE 4
Certificate Number: 19-HG1826648-PDA ABS has used due diligence in the preparation of this certificate, and it represents the information on the product in the ABS Records as of the date and time the certificate is printed. If the Rules and/or standards used in the PDA evaluation are revised or if there is a design modification (whichever occurs first), a PDA revalidation may be necessary. The continued validity of the MA is dependent on completion of satisfactory audits as required by the ABS Rules.