Operating Instruction DD 250-CA
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Preparations at the workplace
- 5.1 DD-HD 30: Setting up the drill stand and setting the drilling angle
- 5.2 DD-HD 30: Locking the carriage on the drill stand
- 5.3 Fitting the hand wheel on the drill stand
- 5.4 Securing the drill stand with an anchor
- 5.5 Securing the drill stand by vacuum
- 5.6 DD-HD 30: Fastening the drill stand with the threaded spindle (accessory)
- 5.7 DD-HD 30: Extending the rail (accessory) on the drill stand
- 5.8 DD-HD 30: Fitting the spacer (accessory)
- 5.9 DD-HD 30: Attaching the diamond core drilling machine to the drill stand
- 5.10 Fitting the water connection (accessory)
- 5.11 installing the water collection system (accessory)
- 6 Types of work
- 6.1 Setting the depth gage (accessory)
- 6.2 Fitting the diamond core bit (BL chuck)
- 6.3 Fitting the diamond core bit with an alternative type of chuck
- 6.4 Selecting the speed
- 6.5 Portable residual current device (PRCD)
- 6.6 Operating the diamond core drilling machine
- 6.7 Switching off the diamond core drilling machine
- 6.8 DD-HD 30: Detaching the diamond core drilling machine from the drill stand
- 7 Care and maintenance
- 8 Transport and storage
- 9 Troubleshooting
- 10 Disposal
- 11 FCC statement (applicable in US) / IC statement (applicable in Canada)
- 12 Manufacturer’s warranty
- 13 Further information
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Préparatifs
- 5.1 DD-HD 30 : Montage de la colonne de forage et ajustement de l'angle de forage
- 5.2 DD-HD 30 : Blocage du boîtier de guidage sur la colonne de forage
- 5.3 Montage du volant à main sur la colonne de forage
- 5.4 Fixation de la colonne de forage avec bride d'ancrage
- 5.5 Fixation de la colonne de forage avec une semelle-ventouse
- 5.6 DD-HD 30 : Fixation de la colonne de forage avec broche filetée (accessoire)
- 5.7 DD-HD 30 : Rallonge de la crémaillère (accessoire) sur la colonne de forage
- 5.8 DD-HD 30 : Montage de l'entretoise (accessoire)
- 5.9 DD-HD 30 : Fixation de la carotteuse diamant sur la colonne de forage
- 5.10 Installation du raccordement d'eau (accessoire)
- 5.11 Montage du système de récupération d'eau (accessoire)
- 6 Travail
- 6.1 Réglage de la butée de profondeur (accessoire)
- 6.2 Mise en place de la couronne diamantée (porte-outil BL)
- 6.3 Montage de la couronne diamantée avec un porte-outil alternatif
- 6.4 Sélection de la vitesse de rotation
- 6.5 Disjoncteur à tension nulle PRCD
- 6.6 Maniement de la carotteuse diamant
- 6.7 Mise en arrêt de la carotteuse diamant
- 6.8 DD-HD 30 : Démontage de la carotteuse diamant de la colonne de forage
- 7 Nettoyage et entretien
- 8 Transport et entreposage
- 9 Aide au dépannage
- 10 Recyclage
- 11 Déclaration FCC (valable aux États-Unis) / Déclaration IC (valable au Canada)
- 12 Garantie constructeur
- 13 Informations complémentaires
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Preparación del trabajo
- 5.1 DD-HD 30: montaje del soporte y ajuste del ángulo de perforación
- 5.2 DD-HD 30: bloqueo del carro en el soporte
- 5.3 Montaje de la rueda de mano en el soporte
- 5.4 Fijación del soporte con taco
- 5.5 Fije el soporte mediante vacío
- 5.6 DD-HD 30: fijación del soporte con el husillo roscado (accesorio)
- 5.7 DD-HD 30: prolongación del raíl (accesorio) en el soporte
- 5.8 DD-HD 30: montaje del distanciador (accesorio)
- 5.9 DD-HD 30: fijación de la perforadora de diamante en el soporte
- 5.10 Instalación de la toma del agua (accesorio)
- 5.11 Montaje del sistema colector de agua (accesorio)
- 6 Procedimiento de trabajo
- 6.1 Ajuste del tope de profundidad (accesorio)
- 6.2 Montaje de corona perforadora de diamante (portaútiles BL)
- 6.3 Montaje de la corona perforadora de diamante con portaútiles alternativo
- 6.4 Selección de la velocidad
- 6.5 Interruptor de corriente de defecto PRCD
- 6.6 Uso de la perforadora de diamante
- 6.7 Desconexión de la perforadora de diamante
- 6.8 DD-HD 30: retirada de la perforadora de diamante del soporte
- 7 Cuidado y mantenimiento
- 8 Transporte y almacenamiento
- 9 Ayuda en caso de averías
- 10 Reciclaje
- 11 Indicación FCC (válida en EE. UU.) / indicación lC (válida en Canada)
- 12 Garantía del fabricante
- 13 Más información
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Preparação do local de trabalho
- 5.1 DD-HD 30: Montar a coluna e ajustar o ângulo de perfuração
- 5.2 DD-HD 30: Travar o patim na coluna
- 5.3 Montar o volante à coluna
- 5.4 Fixar a coluna com bucha
- 5.5 Fixar a coluna com vácuo
- 5.6 DD-HD 30: Fixar a coluna com o varão de enroscar (acessório)
- 5.7 DD-HD 30: Utilizar a extensão da guia (acessório) na coluna
- 5.8 DD-HD 30: Montar o distanciador (acessório)
- 5.9 DD-HD 30: Fixar o perfurador diamantado à coluna
- 5.10 Ligar o fornecimento de água (acessório)
- 5.11 Montar o sistema colector de água (acessório)
- 6 Trabalhar
- 6.1 Ajustar o limitador de profundidade (acessório)
- 6.2 Colocar a coroa diamantada (mandril BL)
- 6.3 Montar a coroa diamantada com porta-ferramentas alternativo
- 6.4 Seleccionar a rotação
- 6.5 Disjuntor de segurança PRCD
- 6.6 Operar o perfurador diamantado
- 6.7 Desligar o perfurador diamantado
- 6.8 DD-HD 30: Separar o perfurador diamantado da coluna
- 7 Conservação e manutenção
- 8 Transporte e armazenamento
- 9 Ajuda em caso de avarias
- 10 Reciclagem
- 11 Declaração FCC / IC
- 12 Garantia do fabricante
- 13 Mais informações
20 English 2279864
*2279864*
6.7 Switching off the diamond core drilling machine
WARNING
Risk of personal injury and material damage The diamond core bit fills with water during overhead drilling.
The diamond core drilling machine may become damaged and the risk of electric shock is increased.
▶ As a first step, carefully allow the water to drain away after completing overhead drilling. This is done
by disconnecting the water supply from the water flow regulator and draining the water by opening the
water flow regulator. Do not allow the water to run over the motor and cover.
1. Connect the water flow regulator to the diamond core drilling machine.
2. Remove the diamond core bit from the hole.
3. Switch off the diamond core drilling machine.
4. Lock the carriage on the rail with the carriage lock.
5. Switch off the wet-type industrial vacuum cleaner (if used).
6.8 DD-HD 30: Detaching the diamond core drilling machine from the drill stand
1. Lock the carriage on the rail with the carriage lock.
2. Remove the supply cord from the cord guide on the carriage cover.
CAUTION
Risk of personal injury and material damage Hazard presented by a falling diamond core drilling machine.
▶ Hold the core drilling machine tightly with one hand by the carrying handle.
3. Loosen the eccentric pin for locking the tool on the carriage.
4. Pull out the eccentric pin.
5. Remove the diamond core drilling machine from carriage.
6. Push the eccentric pin into the carriage as far as it will go.
7 Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply cord connected to a power outlet
can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove any dirt that may be adhering to surfaces.
• Clean the cooling air slots carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.
• Always keep the connection end and the chuck of the core drilling machine clean and lightly greased.
• Clean the outside of the appliance at regular intervals with a slightly damp cloth. Do not use a spray,
pressure jet washer or running water for cleaning.
Maintenance
WARNING
Danger of electric shock! Improper repairs to electrical components may lead to serious injuries including
burns.
▶ Repairs to the electrical section of the tool or appliance may be carried out only by trained electrical
specialists.
• Check all visible parts and controls for signs of damage at regular intervals and make sure that they all
function correctly.
• Do not operate the product if signs of damage are found or if parts malfunction. Have it repaired
immediately by Hilti Service.
• After cleaning and maintenance, fit all guards or protective devices and check that they function correctly.