PRODUCT TECHNICAL GUIDE SUPPLEMENT DR AF T X-MW Mechanical / Electrical Clips and Hangers Section 3.2.
X-MW Supplement Guide 3.2.18 X-MW MECHANICAL / ELECTRICAL CLIPS AND HANGERS 3.2.18.1 Product Description 3.2.18.1 Product Description X-MW MX Wire hanging system For fastening heating, ventilation, and air condition (HVAC), and lighting to ceiling. System can be used with batteryactuated tools and X-P 20 B3 MX, and X-S 14 B3 MX fasteners. Wire length is from 6 ft up to 20 ft. System utilizes loop lock and wire holder. 3.2.18.2 Material Specifications 3.2.18.3 Technical Data 3.2.18.
X-MW Supplement Guide 3.2.18 X-MW MECHANICAL / ELECTRICAL CLIPS AND HANGERS Applications Lock Type Powder or Battery Actuated Tool Typical Application X-MW MX X-MW ALH with X-CX X-MW ALH X-MW ALH Spiral HVAC X-CX X-MW ALH with X-CX X-MW ALH X-CX Rectangular HVAC X-MW MX X-MW ALH Lighting or misc.
X-MW Supplement Guide 3.2.18 X-MW MECHANICAL / ELECTRICAL CLIPS AND HANGERS 3.2.18.3 Technical Data Performance Data Allowable loads in normal weight concrete1, 2 Concrete compressive strength 4000 psi Description Fastener X-MW wire hanger with pre-mounted fastener X-MW MX wire hanger Shank Diameter in. (mm) 6000 psi Tension lb (kN) 45-Degree lb (kN) Tension lb (kN) 45-Degree lb (kN) X-ALH 22 0.177 (4.5) 60 (0.27) 100 (0.44) 60 (0.27) 60 (0.27) X-ALH 27 0.177 (4.5) 100 (0.44) 100 (0.
X-MW Supplement Guide 3.2.
X-MW Supplement Guide 3.2.18 X-MW MECHANICAL / ELECTRICAL CLIPS AND HANGERS Hanger length charts for spiral HVAC with one fastening point using BX/DX loop lock Diameter Ø (in.) Cable Length l (ft.) Required Elevation h (ft.
X-MW Supplement Guide 3.2.18 X-MW MECHANICAL / ELECTRICAL CLIPS AND HANGERS Fastening Quality Assurance Fastening standoff hNVS, min = 0.16 inch hNVS, min = 0.24 inch hNVS, max = 0.28 inch hNVS, max = 0.43 inch 3.2.18.4 Ordering Intormation Fastener Description Fastener Length in. (mm) Fastener Shank Ø in. (mm) Lock Type Wire Ø in. (mm) Wire Length ft. (m) 6.6 (2) Without pre-mounted fastener X-MW MX L - - Loop 0.08" (2.0) X-MW MX L - - Loop 0.08" (2.
In the US: Hilti, Inc. 7250 Dallas Parkway, Suite 1000, Plano, TX 75024 Customer Service: 1-800-879-8000 en español: 1-800-879-5000 Fax: 1-800-879-7000 In Canada: Hilti (Canada) Corporation 2360 Meadowpine Blvd. Mississauga, Ontario, L5N 6S2 Customer Service: 1-800-363-4458 Fax: 1-800-363-4459 www.hilti.com www.hilti.ca *14001 US only The data contained in this literature was current as of the date of publication. Updates and changes may be made based on later testing.
