Type approval_A-0_ABS_CFS-T
Certificate Number: 19-DL1862647-PDA
05/JUN/2019
Confirmation of Product Type Approval
Please refer to the "Service Restrictions" shown below to determine if Unit Certification is required for this product.
This certificate reflects the information on the product in the ABS Records as of the date and time the certificate is
printed.
Pursuant to the Rules of the American Bureau of Shipping (ABS), the manufacturer of the below listed product held
a valid Manufacturing Assessment (MA) with expiration date of 27-MAY-2024. The continued validity of the
Manufacturing Assessment is dependent on completion of satisfactory audits as required by the ABS Rules.
And; a Product Design Assessment (PDA) valid until subject to continued compliance with the Rules or standards
used in the evaluation of the product.
The above entitle the product to be called Product Type Approved.
The Product Design Assessment is valid for products intended for use on ABS classed vessels, MODUs or facilities
which are in existence or under contract for construction on the date of the ABS Rules used to evaluate the
Product.
ABS makes no representations regarding Type Approval of the Product for use on vessels, MODUs or facilities
built after the date of the ABS Rules used for this evaluation.
Due to wide variety of specifications used in the products ABS has evaluated for Type Approval, it is part of our
contract that; whether the standard is an ABS Rule or a non-ABS Rule, the Client has full responsibility for
continued compliance with the standard.
Product Name: Fire Stop System
Model Name(s): Hilti Cable Transit System: "CFS-T SS", "CFS-T SSF", "CFS-T
RR", "CFS-T RRS", "CFS-T SSR", "CFS-T SSR/R30", "CFS-T SSRF/R30",
"CFS-T EMC", "CFS-T RR EMC".
Presented to:
HILTI AKTIENGESELLSCHAFT
FELDKIRCHERSTR. 100
Liechtenstein
Intended Service: Multi cable transit systems for A-0 steel bulkhead and deck penetrations.
Description: Modular cable transit system consisting of steel frames or plugs in combination
with insert blocks, made from halogen-free synthetic rubber, as well as
compression units and anchor plates. For technical details and data, please find
attached "Product Drawings".
Tier: 3
Ratings: Class "A-0" steel bulkhead and deck penetrations. Model SSF 8x1 tested water
tight at a pressure of 4.5 bar, and gas tight at a pressure of 3 bar. Model SS-2x1
tested water tight at a pressure of 11 bar and gas tight at a pressure of 7 bar. Filler
module tested by means of compressed air before and after storage in a climatic
testing cabinet for air tightness (0.5 bar, 10 min.) after storage at -60°C for four
days. Degree of Protection: IP66, IP67, IP69 (TÜV SÜD, TR-46085-19369-02).
Service Restrictions: 1. Unit Certification is not required for this product. If the manufacturer or purchaser
request an ABS Certificate for compliance with a specification or standard, the
specification or standard, including inspection standards and tolerances, must be
clearly defined. 2. The scope of Type Approval is to comply with MSC.1/Circ.1221
dated 11 December 2006. 3. Insulation is to be carried out in accordance with the
Warringonfiregent Reports Nos. 19288A dated 20 November 2018, 19289A dated
06/05/2019 7:42:43 AM Copyright 2001 American Bureau of Shipping. All rights reserved. Page 1 of 3