Operating Instruction TE 2, TE 2-S, TE 2-M (02)

8 English
@
Three-jaw chuck (TE 2-M)
;
Dust shield
=
Chuck
%
Chuck locking ring (TE 2-M)
&
Depth gauge
(
Function selector switch
)
Forward / reverse switch
+
Grip
§
Control switch
/
Lockbutton
:
Rating plate
∙
Side handle
3.2 Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws.
▶ The power tool may be operated only when connected to a power supply providing a voltage and
frequency in compliance with the information given on its type plate.
3.3 Items supplied
Rotary hammer, side handle, depth gauge, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
4 Technical data
Note
For details of the rated voltage, current, frequency and/or input power, please refer to the power tool’s
country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s power output must be at least
twice the rated input power shown on the rating plate of the power tool. The operating voltage of the
transformer or generator must always be within +5% and -15% of the rated voltage of the power tool.
TE 2 TE 2-S TE 2M
Weight
6.0 lb
(2.7 kg)
6.0 lb
(2.7 kg)
6.4 lb
(2.9 kg)
Drilling diameter range in con-
crete/masonry (hammer drill
bit)
3/16 in …7/8 in 3/16 in …7/8 in 3/16 in …7/8 in
Drilling diameter range in con-
crete/masonry (hammer drill
bit)
4 mm …22 mm 4 mm …22 mm 4 mm …22 mm
Drilling diameter
range in wood (solid)
3/16 in …3/4 in 3/16 in …3/4 in 3/8 in …3/4 in
•/• •/• 3/16 in …3/8 in
Drilling diameter
range in wood (solid)
4 mm …20 mm 4 mm …20 mm 10 mm …20 mm
•/• •/• 4 mm …10 mm
Drilling diameter
range in metal
(solid-head drill bit)
3/16 in …1/2 in 3/16 in …1/2 in 5/16 in …1/2 in
•/• •/• 3/16 in …5/16 in
Drilling diameter
range in metal
(solid-head drill bit)
3 mm …13 mm 3 mm …13 mm 8 mm …13 mm
•/• •/• 3 mm …8 mm
Maximum length of the depth
gauge
7 in 7 in 7 in
Maximum length of the depth
gauge
180 mm 180 mm 180 mm
Printed: 04.10.2017 | Doc-Nr: PUB / 5261122 / 000 / 01