HILTI ANCHORS FOR ATTACHMENTS TO HOLLOW CORE CONCRETE PANELS
INTRODUCTION Hollow core concrete panels are used in many types of structures including office buildings, hotels, multi family residential units and others. The ease of jobsite construction makes hollow core concrete panels a convenient base material between floors of multi story structures. Other building elements, including partitons, supports, mechanical and electrical equipment, plumbing and other piping must be attached to or hung from these panels.
Hilti Anchors for attachments to Hollow Core Concrete Panels INSTALLATION PARAMETERS Table 1 — KWIK HUS-EZ and KWIK HUS-EZ P specifications Setting information Symbol Units Nominal anchor diameter 1/4 Hex head Head style Pan head dbit in. Minimum base material thickness hmin in. Minimum Fixture hole diameter dh in. Minimum anchor spacing smin in. 4-1/8 Minimum edge distance cmin in.
KWIK HUS-EZ I AND KWIK HUS-EZ E SCREW ANCHOR PRODUCT DESCRIPTION KWIK HUS EZ I and KWIK HUS-EZ E carbon steel anchors Anchor System Features and Benefits • OSHA 1926.
Hilti Anchors for attachments to Hollow Core Concrete Panels DESIGN INFORMATION Table 4 — Hilti KWIK HUS-EZ I and KWIK HUS-EZ E loads in hollow core concrete panels1,2 Anchor Diameter (inches) Hanger rod size 14-20 UNC 1/4 3/8-16 UNC 3/8 1/2-13 UNC Allowable loads, lb (kN) Min. effective embedment h ef (inches) Tension 3 Ultimate load lb (kN) Shear 3 Tension Shear 1-1/8 400 (1.8) 215 (1.0) 1600 (7.1) 860 (3.8) 1-3/8 525 (2.3) 585 (2.6) 2100 (9.3) 2340 (10.4) 1-1/8 400 (1.
HDI-P DROP-IN ANCHORS PRODUCT DESCRIPTION HDI-P Drop-in Anchors Anchor System Features and Benefits • Optimized anchor length to allow reliable fastenings in hollow core panels, precast plank and post tensioned slabs HDI-P Drop-in Anchor • Shallow drilling enables fast installation • Lip provides flush installation, consistent anchor depth and easy rod alignment • HSD-G 3/8 setting tool with hand guard leaves mark on flange when anchor is set properly to enable inspection and verification of proper expa
Hilti Anchors for attachments to Hollow Core Concrete Panels DESIGN INFORMATION Table 6 — Hilti HDI-P loads in hollow core concrete panels1,2 Nominal Anchor Diameter (inches) Length in. (mm) Allowable loads, lb (kN) 3 Nominal Bit Diameter in. Tension Shear Ultimate loads lb (kN) Tension Shear 1/4 5/8 (15.9) 3/8 310 (1.4) 455 (2.0) 1,550 (6.9) 2,275 (10.1) 3/8 3/4 (19.1) 1/2 420 (1.9) 800 (3.6) 2,100 (9.3) 4,000 (17.8) 1/2 1 (25.4) 5/8 620 (2.8) 1100 (4.9) 3,100 (13.
HDI-P TZ FLUSH ANCHORS PRODUCT DESCRIPTION HDI-P TZ Flush anchors Anchor System Features and Benefits Carbon steel HDI-P TZ • Flush anchor anchor with optimized length for reliable fastenings in post-tensioned cable concrete slabs • Suitable for uncracked and cracked concrete including seismic areas • Productive installation with HDI-P TZ automatic setting tool with hammer drill Auto-setting tool HDI-P TZ • Used with Hilti Dust Removal System (DRS) for compliance with Table 1 of OSHA 1926.
Hilti Anchors for attachments to Hollow Core Concrete Panels DESIGN INFORMATION Table 8 — Hilti HDI-P TZ loads in hollow core concrete panels1,2 Nominal Anchor Diameter (inches) 3/8 Nominal Bit Diameter in. Length in. (mm) 3/4 (19.1) 9/16 Allowable loads, lb (kN) 3 Tension 475 Shear (2.1) 700 (3.1) Ultimate loads lb (kN) Tension 1,900 (8.5) Shear 2,800 (12.5) 1 The admissable anchor location must be established to prevent damage to the prestressed cable during the drilling process.
HIT-HY 270 ANCHORS PRODUCT DESCRIPTION HIT-HY 270 Adhesive Anchor System Anchor System Features and Benefits • Injectable two-component hybrid adhesive mortar • Fast cure adhesive for quick installation time Hilti HIT-HY 270 Cartridge • Mixing nozzle provides proper mix ratio Hilti HAS Threaded rods HIT-SC Screen INSTALLATION PARAMETERS Table 10 — H ilti Installation specifications for HAS threaded rod in hollowcore concrete panels Setting information Symbol Unit Figure 5 — Hilti HIT-HY 270 adhe
Hilti Anchors for attachments to Hollow Core Concrete Panels DESIGN INFORMATION Table 11 — Hilti HIT-HY 270 loads for threaded rods in hollow core concrete panels1,4,5,6,7 Nominal Anchor Diameter (inches) 3/8 2 Allowable loads, lb (kN) 3 Nominal Bit Diameter in. Effective embedment in. (mm) 2 (19.1) Tension 5/8 450 Ultimate loads lb (kN) Shear (2.0) 560 Tension (2.5) 2,250 (10.0) Shear 2,800 (12.
DBS • 08/19 Hilti, Inc. (U.S.) 1-800-879-8000 en español 1-800-879-5000 www.hilti.com Hilti (Canada) Corporation 1-800-363-4458 www.hilti.
