Supplement for Hilti Anchors For Attachments to Hollow Core Concrete Panels
2
August 2019
INTRODUCTION
Hollow core concrete panels are used in many types of structures including office buildings, hotels, multi family residential units
and others. The ease of jobsite construction makes hollow core concrete panels a convenient base material between floors of multi
story structures. Other building elements, including partitons, supports, mechanical and electrical equipment, plumbing and other
piping must be attached to or hung from these panels. Hilti provides a variety of anchoring systems for reliable connection to hollow
core concrete panels. Hilti systems include several screw anchors (KH-EZ, KH-EZ P, KH-EZ I, and KH-EZ E), internally threaded
flush anchors (HDI-P TZ, HDI-P) and adhesive anchors (HIT HY-270).
This document is a supplement to the Hilti North American Product Technical Guide, Volume 2, Anchor Fastening Technical
Guide, Edition 19 (PTG Ed. 19). Please refer to the publication in its entirety, which is available at www.hilti.com or www.hilti.ca, for
complete details including data development, product specifications, general suitability, installation, corrosion and spacing and
edge distance guidelines.
KWIK HUS-EZ AND KWIK HUS-EZ P SCREW ANCHOR
PRODUCT DESCRIPTION
KWIK HUS EZ carbon steel anchors
Anchor System Features and Benets
Carbon Steel 1/4"-3/8"
KWIK HUS-EZ
• OSHA 1926.1153 Table 1 compliant
installation options including the Hilti
SafeSet™ hollow drill bit technology
• Easy installation using impact tool or
torque wrench
• Product and length identification marks
facilitate quality control after installation
• Through fixture installation improves
productivity and accurate installation
• Thread design enables quality setting and
exceptional load values in wide variety of
base material strengths
• ¼” diameter available in hex head and pan
head styles
• Anchor is fully removable
• Anchor diameter is same as drill bit
diameter. No special diameter bit
required
Carbon Steel 1/4" KWIK
HUS EZ P