Supplement for Hilti Anchors For Attachments to Hollow Core Concrete Panels

4
August 2019
KWIK HUS-EZ I AND KWIK HUS-EZ E SCREW ANCHOR
PRODUCT DESCRIPTION
KWIK HUS EZ I and KWIK HUS-EZ E carbon steel anchors
Anchor System Features and Benets
Carbon Steel 1/4", 3/8"
KWIK HUS-EZ I
• OSHA 1926.1153 Table 1 compliant
installation options including the Hilti
SafeSet™ hollow drill bit technology
• Easy installation using impact tool or
torque wrench
• Product and length identification marks
facilitate quality control after installation
• Thread design enables quality setting and
exceptional load values in wide variety of
base material strengths
• 1/4" diameter available in internally and
externally threaded head styles
• Anchor is fully removable
• Anchor diameter is same as drill bit
diameter. No special diameter bit
required
Carbon Steel 1/4" KWIK
HUS EZ E
INSTALLATION PAR AMETERS
Table 3 — KWIK HUS-EZ I and KWIK HUS-EZ E
specifications
Setting information Symbol Units
Nominal anchor diameter
1/4
3/8
Head style KH-EZ E KH-EZ I
Nominal bit diameter d
bit
in. 1/4
3/8
Threaded rod diameter d
rod
in. N/A 1/4 3/8
1/2
Minimum base material
thickness
h
min
in. 1-1/8
Minimum anchor
spacing
s
min
4-1/8
Minimum edge dis-
tance
c
min
3-3/4
Installation torque
1
T
inst
ft-lb 18
40
(N-m) (24)
(54)
Maximum impact
wrench torque rating
2
T
impact, max
ft-lb 114
(Nm) (155)
Wrench size in. 1/2 3/8 1/2
11/16
1 T
inst
is the maximum installation torque that may be applied with a torque wrench.
2 Because of variability in measurement procedures, the published torque of an impact tool may
not correlate properly with the above setting torques.
Over torquing can damage the anchor and/or reduce its holding capacity.
Figure 2 — Installation of Hilti KWIK HUS-EZ I
(KH-EZ I) and KWIK HUS-EZ E (KH-EZ E)
in hollow core concrete panels