Supplement for Hilti Anchors For Attachments to Hollow Core Concrete Panels

Hilti Anchors for attachments to Hollow Core Concrete Panels
9
August 2019
DESIGN INFORMATION
Table 8 — Hilti HDI-P TZ loads in hollow core concrete panels
1,2
Nominal
Anchor
Diameter
(inches)
Length
in. (mm)
Nominal
Bit
Diameter
in.
Allowable loads, lb (kN)
3
Ultimate loads lb (kN)
Tension Shear Tension Shear
3/8 3/4 (19.1) 9/16 475 (2.1) 700 (3.1) 1,900 (8.5) 2,800 (12.5)
1 The admissable anchor location must be established to prevent damage to the prestressed cable during the drilling process. Verify the location and height of the cable with the hollow core
plank supplier to confirm admissable anchor location.
2 Minimum compressive strength of prestressed concrete is 7,000 psi. Published results represent the average results conducted in local base materials. Due to variations in materials and
dimensional configurations, on-site testing is required to determine the actual performance.
3 Allowable loads calculated with a factor of safety of 4.
ORDERING INFORMATION
HDI-P TZ anchor
Description Bit diameter (inches) Qty/box
HDI-P TZ 3/8"
9/16 100
Setting tools for HDI-P TZ anchors
Description
Auto setting tool HDI-P TZ 3/8"
Setting tool HST HDI-P TZ 3/8"x20