Operating Instruction DG 150

English 9
$
Diamond cup wheel
£
Lamellar seal, small
|
Clamping flange
¡
Lamellar seal, large
Q
Retaining ring
W
Arbor
E
Locking ring
R
Guard bottom section
T
Guard top section
Z
Arbor lockbutton
3.3 Tool components, status indicators and controls
U
LED indicator
I
Supply cord
O
Locating lug
P
Carrying handle
Ü
Clip for power cord
[
Electrical socket with hinged cover
]
Latching lug
3.4 Intended use
The product described is an electrically powered diamond grinder. It is designed for professional use in
grinding mineral materials. The DG 150 grinder can be operated only in combination with the DPC 20 power
conditioner. Always use a dust extractor to ensure optimum dust removal.
The grinder is designed exclusively for dry abrasive removal of uncoated mineral materials and thin coatings
on concrete and similar mineral materials, with a maximum layer thickness of 3 mm (0.12 in).
3.5 Possible misuse
Do not use the product may in environments where there is a risk of explosion.
Do not use the product for wet grinding.
Do not use the product to work on hazardous or flammable materials (e.g. asbestos, magnesium, wood).
3.6 Items supplied
DG 150 grinder, DPC 20 power conditioner, clamping flange, clamping nut, pin wrench, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or online at:
www.hilti.group | USA: www.hilti.com
4 Technical data
4.1 Technical data, DG 150
Rated speed, speed I
4,700 /min
Rated speed, speed II
6,600 /min
Weight of the DG 150 in accordance with EPTA procedure 01/2003
4.1 kg
(9.0 lb)
Protection class (EN 60745 1)
Protection class II
(double-insulated)
Printed: 20.11.2017 | Doc-Nr: PUB / 5385705 / 000 / 01