LEED Information for HSL-3 Heavy Duty Expansion Anchors

Hilti, Inc.
5400 South 122
nd
East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
August 26, 2015
To Whom It May Concern:
Re:
Hilti HSL-3 Expansion Anchor – LEED Information
Item Numbers:
371775
371776
371778
371779
371781
371782
371784
371785
371787
371788
371790
371791
371793
371796
371799
371800
371802
371803
371805
371806
371807
371808
371809
371810
371811
371814
284908
284910
284912
67922
67924
67926
67928
The Hilti HSL-3 Expansion Anchor is manufactured in Austria.
The Hilti HSL-3 Expansion Anchor is manufactured from carbon steel and is recyclable. The post-consumer recycled steel content
is 25%. The pre-consumer recycled content is not known.
The VOC content for Hilti HSL-3 Expansion Anchor is 0 grams/liter.
Please feel free to contact me at [phone] if you have questions.
Sincerely,
Jerry Metcalf MPH, CHMM
Sr. Manager, Safety/Environmental
Hilti Inc.
918 872 3704
[e-mail]
Rev. Date: 8/13/15
The manufacturing plant location on this certificate has been provided for LEEDS reporting purposes only. It should never be used
for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America
requirements, as those requirements differ.
The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. “Specially” produced
non-catalog Hilti products may have differing manufacturing plant locations.
Contact your Hilti representative in cases of “specially” produced products for a custom LEEDS certificates.