Operating Instruction SF_BT-A22 (01)

English 11
▶ Fit the belt hook on the appropriate side of the drill.
5.4 Fitting or removing accessory tools
CAUTION
Risk of injury. The drill may start inadvertently.
▶ Make sure that the safety lock has been activated or that the battery has been removed from the
drill.
1. Open the keyless chuck.
2. Check that the connection end of the accessory tool is clean and then insert it in the keyless chuck or,
respectively, pull the accessory tool out of the keyless chuck.
3. Retighten the keyless chuck.
5.5 Switching on
▶ Press the control switch.
Note
The running speed can be controlled smoothly right up to maximum speed by varying how far the
control switch is pressed in.
5.6 Switching off
▶ Release the control switch.
Printed: 19.10.2016 | Doc-Nr: PUB / 5310862 / 000 / 00