Operating Instruction TE 500 (03)

12 English
5.2.1 Chiseling
▶
Set the function selector switch to the position.
5.2.2 Switching sustained operation on and off
When chiseling, the on/off switch can be locked in the “on” position.
1. Push the lockbutton for continuous operation forward.
2. Press the on/off switch as far as it will go.
◁ The product then runs in sustained operating mode.
3. Push the lockbutton for continuous operation back.
◁ The product switches off.
6 Care and maintenance
WARNING
Danger of electric shock! Carrying out care and maintenance while the supply cord is connected to the
power outlet presents a risk of serious injuries including burns.
▶
Always unplug the supply cord before carrying out all care and maintenance tasks.
Care
• Carefully remove stubborn dirt from the tool.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
they can attack the plastic parts.
Printed: 02.02.2018 | Doc-Nr: PUB / 5367085 / 000 / 01