Operating Instruction TE 800, TE 800-AVR (01)

*2064796*
2064796 English 7
Status Meaning
The service indicator lights. End of service interval – servicing
is due. Bring the product to Hilti
Service in good time. This will help
to ensure that it’s always ready for
use.
3.5 Power level indicator
The breaker is equipped with a power level indicator LED.
Status Meaning
The power level indicator lights. Chiseling power is reduced to
70%. Press the power level
selector switch again to return to
full chiseling power. The chiseling
power level can be adjusted only
when the tool is plugged in to the
electric supply.
3.6 Items supplied
Breaker, side handle, operating instructions.
Other system products approved for use with this product can be found at
your local Hilti Store or at: www.hilti.group | USA: www.hilti.com
4 Technical data
4.1 Breaker
For details of the rated voltage, current, frequency and/or input power,
please refer to the power tool’s country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
TE 800 TE 800AVR
Rated power input
1,850 W 1,850 W
Single impact energy
21 J 21 J
Weight
10.5 kg
(23.1 lb)
10.6 kg
(23.4 lb)
Printed: 08.07.2019 | Doc-Nr: PUB / 5210095 / 000 / 03