Operating Instruction DD 350-CA (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Preparations at the workplace
- 5.1.1 Setting up the drill stand
- 5.1.2 Installing the hand wheel
- 5.1.3 Securing the drill stand with an anchor
- 5.1.4 Securing the drill stand by vacuum
- 5.1.5 Adjusting the drilling angle when using the drill stand with combination base plate
- 5.1.6 Extending the rail
- 5.1.7 Installing the spacer
- 5.1.8 Securing the diamond core drilling machine to the drill stand
- 5.1.9 Installing the water supply connection
- 5.1.10 installing the water collection system (accessory)
- 5.1.11 Inserting a diamond core bit
- 5.1.12 Setting the depth gage (accessory)
- 5.2 Types of work
- 5.2.1 Keep the danger zone clear
- 5.2.2 Selecting the speed
- 5.2.3 Portable residual current device (PRCD)
- 5.2.4 Using the hole-starting function
- 5.2.5 Operating the diamond core drilling machine
- 5.2.6 Operating the diamond core drilling machine dry
- 5.2.7 Switching off the diamond core drilling machine
- 5.2.8 Procedure for dealing with a jammed core bit
- 5.2.9 Removing the diamond core bit
- 5.2.10 Removing the diamond core drilling machine
- 5.1 Preparations at the workplace
- 6 Care and maintenance
- 7 Transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 5.1 Préparatifs
- 5.1.1 Montage de la colonne de forage
- 5.1.2 Montage du volant
- 5.1.3 Fixation de la colonne de forage avec bride d'ancrage
- 5.1.4 Fixation de la colonne de forage avec une semelle-ventouse
- 5.1.5 Réglage de l'angle de forage sur la colonne à l'aide de la semelle combinée
- 5.1.6 Rallongement de la crémaillère
- 5.1.7 Montage de l'entretoise
- 5.1.8 Fixation de la carotteuse diamant sur la colonne de forage
- 5.1.9 Installation du raccordement d'eau
- 5.1.10 Montage du système de récupération d'eau (accessoire)
- 5.1.11 Mise en place de la couronne diamantée
- 5.1.12 Réglage de la butée de profondeur (accessoire)
- 5.2 Travail
- 5.2.1 Périmètre de sécurité
- 5.2.2 Sélection de la vitesse de rotation
- 5.2.3 Disjoncteur à tension nulle PRCD
- 5.2.4 Amorce avec la fonction d'amorçage
- 5.2.5 Maniement de la carotteuse diamant
- 5.2.6 Utilisation à sec de la carotteuse diamant
- 5.2.7 Mise en arrêt de la carotteuse diamant
- 5.2.8 Étapes de travail en cas de couronne de forage coincée
- 5.2.9 Démontage de la couronne de forage diamantée
- 5.2.10 Retrait de la carotteuse diamant
- 5.1 Préparatifs
- 6 Nettoyage et entretien
- 7 Transport et entreposage
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Preparación del trabajo
- 5.1.1 Montaje del soporte
- 5.1.2 Montaje de la rueda manual
- 5.1.3 Fijación del soporte con taco
- 5.1.4 Fije el soporte mediante vacío
- 5.1.5 Ajuste el ángulo de perforación en el soporte con placa base combinada
- 5.1.6 Prolongación del raíl
- 5.1.7 Montaje del distanciador
- 5.1.8 fijación de la perforadora de diamante en el soporte
- 5.1.9 Instalación de la toma de agua
- 5.1.10 Montaje del sistema colector de agua (accesorio)
- 5.1.11 Inserción de la corona perforadora de diamante
- 5.1.12 Ajuste del tope de profundidad (accesorio)
- 5.2 Procedimiento de trabajo
- 5.2.1 Mantener despejada la zona de peligro
- 5.2.2 Selección de la velocidad
- 5.2.3 Interruptor de corriente de defecto PRCD
- 5.2.4 Inicio de la perforación con función de inicio de perforación
- 5.2.5 Uso de la perforadora de diamante
- 5.2.6 Uso en seco de la perforadora de diamante
- 5.2.7 Desconexión de la perforadora de diamante
- 5.2.8 Pasos a seguir en caso de atasco en la corona de perforación
- 5.2.9 Desmontaje de la corona perforadora de diamante
- 5.2.10 Desmontaje de la perforadora de diamante
- 5.1 Preparación del trabajo
- 6 Cuidado y mantenimiento
- 7 Transporte y almacenamiento
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Utilização
- 5.1 Preparação do local de trabalho
- 5.1.1 Montar a coluna
- 5.1.2 Montar o volante
- 5.1.3 Fixar a coluna com bucha
- 5.1.4 Fixar a coluna com vácuo
- 5.1.5 Ajustar o ângulo na coluna de suporte com base combinada
- 5.1.6 Utilizar a extensão do carril
- 5.1.7 Montar distanciador
- 5.1.8 Fixar o perfurador diamantado à coluna
- 5.1.9 Ligar o fornecimento de água
- 5.1.10 Montar o sistema colector de água (acessório)
- 5.1.11 Inserir a coroa diamantada de perfuração
- 5.1.12 Ajustar o limitador de profundidade (acessório)
- 5.2 Trabalhar
- 5.2.1 Manter a área de perigo desimpedida
- 5.2.2 Seleccionar a rotação
- 5.2.3 Disjuntor de segurança PRCD
- 5.2.4 Perfurar com função de perfuração
- 5.2.5 Operar o perfurador diamantado
- 5.2.6 Operar o perfurador diamantado a seco
- 5.2.7 Desligar o perfurador diamantado
- 5.2.8 Passos de trabalho no caso de uma coroa de perfuração encravada
- 5.2.9 Retirar a coroa de perfuração diamantada
- 5.2.10 Retirar o perfurador diamantado
- 5.1 Preparação do local de trabalho
- 6 Conservação e manutenção
- 7 Transporte e armazenamento
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
English 11
7. Make sure that the diamond core drilling machine is secure on the drill stand.
5.1.9 Installing the water supply connection
CAUTION
Risk of personal injury and material damage The hose may become damaged if it is used incorrectly.
▶ Regularly check the hoses for damage and make sure that the maximum permissible water supply
pressure of 6 bar is not exceeded.
▶ Make sure that the hose does not come into contact with rotating parts.
▶ Make sure that the hose is not damaged as the carriage advances.
▶ Maximum water temperature: 40 °C.
▶ Check the water supply system to ensure there are no leaks.
Note
To avoid damage to the components, use only fresh water containing no dirt particles.
A flow meter can be inserted as an accessory between the device and the water supply.
1. Connect the water flow regulator to the diamond core drilling machine.
2. Connect the water supply (hose connection).
5.1.10 installing the water collection system (accessory) 12
WARNING
Risk of personal injury and material damage If the diamond core drilling machine is damaged the
risk of electric shock is increased.
▶ Do not permit water to run over the motor and cover.
▶ Use of a wet-type industrial vacuum cleaner is mandatory requirement for drilling upward.
Note
The diamond core drilling machine must be at a 90° angle to the slab. The water collection system
sealing disc must match the diamond core bit diameter.
Note
Use of the water collection system allows water to be led away under control, thus preventing the
surrounding area from being heavily soiled. The best results are achieved with a wet-type industrial
vacuum extractor.
Note
When using the drill stand: Before installing the water collector holder, screw the spacer for the water
collector holder to the drill stand.
1. At the front of the drill stand, slacken the bottom screw at the rail.
2. Slip the water collector holder behind the screw from below.
3. Securely tighten the screw.
4. Position the water collector, with seal and water collector sealing disc installed, between the two movable
arms of the holder.
5. Secure the water collector to the holder with the two screws.
6. Connect a wet-type industrial vacuum extractor to the water collector or establish a hose connection
through which the water can drain away.
Printed: 18.10.2017 | Doc-Nr: PUB / 5236054 / 000 / 02