Operating Instruction DD 350-CA (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Preparations at the workplace
- 5.1.1 Setting up the drill stand
- 5.1.2 Installing the hand wheel
- 5.1.3 Securing the drill stand with an anchor
- 5.1.4 Securing the drill stand by vacuum
- 5.1.5 Adjusting the drilling angle when using the drill stand with combination base plate
- 5.1.6 Extending the rail
- 5.1.7 Installing the spacer
- 5.1.8 Securing the diamond core drilling machine to the drill stand
- 5.1.9 Installing the water supply connection
- 5.1.10 installing the water collection system (accessory)
- 5.1.11 Inserting a diamond core bit
- 5.1.12 Setting the depth gage (accessory)
- 5.2 Types of work
- 5.2.1 Keep the danger zone clear
- 5.2.2 Selecting the speed
- 5.2.3 Portable residual current device (PRCD)
- 5.2.4 Using the hole-starting function
- 5.2.5 Operating the diamond core drilling machine
- 5.2.6 Operating the diamond core drilling machine dry
- 5.2.7 Switching off the diamond core drilling machine
- 5.2.8 Procedure for dealing with a jammed core bit
- 5.2.9 Removing the diamond core bit
- 5.2.10 Removing the diamond core drilling machine
- 5.1 Preparations at the workplace
- 6 Care and maintenance
- 7 Transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 5.1 Préparatifs
- 5.1.1 Montage de la colonne de forage
- 5.1.2 Montage du volant
- 5.1.3 Fixation de la colonne de forage avec bride d'ancrage
- 5.1.4 Fixation de la colonne de forage avec une semelle-ventouse
- 5.1.5 Réglage de l'angle de forage sur la colonne à l'aide de la semelle combinée
- 5.1.6 Rallongement de la crémaillère
- 5.1.7 Montage de l'entretoise
- 5.1.8 Fixation de la carotteuse diamant sur la colonne de forage
- 5.1.9 Installation du raccordement d'eau
- 5.1.10 Montage du système de récupération d'eau (accessoire)
- 5.1.11 Mise en place de la couronne diamantée
- 5.1.12 Réglage de la butée de profondeur (accessoire)
- 5.2 Travail
- 5.2.1 Périmètre de sécurité
- 5.2.2 Sélection de la vitesse de rotation
- 5.2.3 Disjoncteur à tension nulle PRCD
- 5.2.4 Amorce avec la fonction d'amorçage
- 5.2.5 Maniement de la carotteuse diamant
- 5.2.6 Utilisation à sec de la carotteuse diamant
- 5.2.7 Mise en arrêt de la carotteuse diamant
- 5.2.8 Étapes de travail en cas de couronne de forage coincée
- 5.2.9 Démontage de la couronne de forage diamantée
- 5.2.10 Retrait de la carotteuse diamant
- 5.1 Préparatifs
- 6 Nettoyage et entretien
- 7 Transport et entreposage
- 8 Aide au dépannage
- 9 Recyclage
- 10 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Preparación del trabajo
- 5.1.1 Montaje del soporte
- 5.1.2 Montaje de la rueda manual
- 5.1.3 Fijación del soporte con taco
- 5.1.4 Fije el soporte mediante vacío
- 5.1.5 Ajuste el ángulo de perforación en el soporte con placa base combinada
- 5.1.6 Prolongación del raíl
- 5.1.7 Montaje del distanciador
- 5.1.8 fijación de la perforadora de diamante en el soporte
- 5.1.9 Instalación de la toma de agua
- 5.1.10 Montaje del sistema colector de agua (accesorio)
- 5.1.11 Inserción de la corona perforadora de diamante
- 5.1.12 Ajuste del tope de profundidad (accesorio)
- 5.2 Procedimiento de trabajo
- 5.2.1 Mantener despejada la zona de peligro
- 5.2.2 Selección de la velocidad
- 5.2.3 Interruptor de corriente de defecto PRCD
- 5.2.4 Inicio de la perforación con función de inicio de perforación
- 5.2.5 Uso de la perforadora de diamante
- 5.2.6 Uso en seco de la perforadora de diamante
- 5.2.7 Desconexión de la perforadora de diamante
- 5.2.8 Pasos a seguir en caso de atasco en la corona de perforación
- 5.2.9 Desmontaje de la corona perforadora de diamante
- 5.2.10 Desmontaje de la perforadora de diamante
- 5.1 Preparación del trabajo
- 6 Cuidado y mantenimiento
- 7 Transporte y almacenamiento
- 8 Ayuda en caso de averías
- 9 Reciclaje
- 10 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 4 Características técnicas
- 5 Utilização
- 5.1 Preparação do local de trabalho
- 5.1.1 Montar a coluna
- 5.1.2 Montar o volante
- 5.1.3 Fixar a coluna com bucha
- 5.1.4 Fixar a coluna com vácuo
- 5.1.5 Ajustar o ângulo na coluna de suporte com base combinada
- 5.1.6 Utilizar a extensão do carril
- 5.1.7 Montar distanciador
- 5.1.8 Fixar o perfurador diamantado à coluna
- 5.1.9 Ligar o fornecimento de água
- 5.1.10 Montar o sistema colector de água (acessório)
- 5.1.11 Inserir a coroa diamantada de perfuração
- 5.1.12 Ajustar o limitador de profundidade (acessório)
- 5.2 Trabalhar
- 5.2.1 Manter a área de perigo desimpedida
- 5.2.2 Seleccionar a rotação
- 5.2.3 Disjuntor de segurança PRCD
- 5.2.4 Perfurar com função de perfuração
- 5.2.5 Operar o perfurador diamantado
- 5.2.6 Operar o perfurador diamantado a seco
- 5.2.7 Desligar o perfurador diamantado
- 5.2.8 Passos de trabalho no caso de uma coroa de perfuração encravada
- 5.2.9 Retirar a coroa de perfuração diamantada
- 5.2.10 Retirar o perfurador diamantado
- 5.1 Preparação do local de trabalho
- 6 Conservação e manutenção
- 7 Transporte e armazenamento
- 8 Ajuda em caso de avarias
- 9 Reciclagem
- 10 Garantia do fabricante
18 English
Malfunction Possible cause Action to be taken
Water escapes from the
chuck during operation.
The diamond core bit isn’t securely
tightened in the chuck.
▶ Tighten the diamond core bit
securely.
▶ Remove the core bit. Rotate the
diamond core bit approx. 90°
about its own axis. Refit the
diamond core bit.
The core bit connection end /
chuck is dirty.
▶ Clean and grease the connec-
tion end and/or the chuck.
The chuck seal or connection end
is defective.
▶ Check the seal and replace it if
necessary.
The drilling system has too
much play.
The diamond core bit isn’t securely
tightened in the chuck.
▶ Tighten the diamond core bit
securely.
▶ Remove the core bit. Rotate the
diamond core bit approx. 90°
about its own axis. Refit the
diamond core bit.
The core bit connection end /
chuck is defective.
▶ Check the connection end and
chuck and replace them if
necessary.
The connection between the dia-
mond core drilling machine and the
carriage or spacers is loose.
▶ Check the connection and,
if necessary, refasten the
diamond core drilling machine.
The carriage has too much play. ▶ Adjust the play between the rail
and carriage. → page 16
Screws / bolts on the drill stand are
loose.
▶ Check the security of screws
/ bolts on the drill stand and
tighten them if necessary.
The drill stand is inadequately fas-
tened.
▶ Fasten the drill stand more
securely.
8.2 The diamond core drilling machine is not in working order
Malfunction Possible cause Action to be taken
The service indicator shows
nothing.
The PRCD isn’t switched on. ▶ Check that the PRCD is
functioning and switch it on.
Interruption in the electric supply. ▶ Plug in another electric tool or
appliance and check whether it
works.
▶ Check the plug connections,
supply cord, power supply line
and main supply fuse.
Temperature, overvoltage or
undervoltage indicator is lit.
The motor has overheated. ▶ Switch the diamond core drilling
machine off (press off-switch in
the middle) and back on again.
Check the water supply. After
cooling down, the diamond core
drilling machine is ready for use
again.
Temperature, overvoltage
or undervoltage indicator is
flashing.
Fault in the power supply. ▶ Switch the diamond core drilling
machine off (press off-switch
in the middle) and back on
again. Check the power supply
(especially during operation by
generator or transformer).
Printed: 18.10.2017 | Doc-Nr: PUB / 5236054 / 000 / 02