Operating Instruction TE 6-A22 (04)
Table Of Contents
- Original operating instructions
- Notice d'utilisation originale
- 1 Indications relatives à la documentation
- 2 Sécurité
- 2.1 Indications générales de sécurité pour les appareils électriques
- 2.2 Indications générales de sécurité applicables aux burineurs
- 2.3 Consignes de sécurité supplémentaires spécifiques au perforateur-burineur
- 2.4 Consignes de sécurité applicables au module récupérateur de poussières
- 2.5 Utilisation et emploi soigneux des accus
- 3 Description
- 4 Caractéristiques techniques
- 5 Utilisation
- 6 Travail
- 7 Nettoyage et entretien
- 8 Transport et stockage
- 9 Aide au dépannage
- 10 Accessoires optionnels
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 4 Datos técnicos
- 5 Manejo
- 5.1 Preparación del trabajo
- 5.2 Colocación de la batería
- 5.3 Extracción de la batería
- 5.4 Montaje de la empuñadura lateral
- 5.5 Montaje y ajuste del tope de profundidad
- 5.6 Montaje/desmontaje del portaútiles
- 5.7 Inserción del útil
- 5.8 Extracción del útil
- 5.9 Realización de trabajos por encima de la cabeza
- 5.10 Colocación del cincel
- 6 Procedimiento de trabajo
- 7 Cuidado y mantenimiento
- 8 Transporte y almacenamiento
- 9 Ayuda en caso de averías
- 10 Accesorios opcionales
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
2 English 2166239
*2166239*
1.3 Product-dependent symbols
1.3.1 Symbols
The following symbols can be used on the product:
Drilling without hammer action
Drilling with hammering action (hammer drilling)
Chiseling
Chisel positioning
Forward / reverse
Rated speed under no load
Direct current (DC)
Li-ion battery
Hilti Li-ion battery type series used. Observe the information given in the section headed In-
tended use.
Never use the battery as a striking tool.
Do not drop the battery. Never use a battery that has suffered an impact or is damaged in any
other way.
The power tool supports near-field communication (NFC) technology, which is compatible with
iOS and Android platforms.
1.4 Product information
products are designed for professional users and only trained, authorized personnel are
permitted to operate, service and maintain the products. This personnel must be specifically informed about
the possible hazards. The product and its ancillary equipment can present hazards if used incorrectly by
untrained personnel or if used not in accordance with the intended use.
The type designation and serial number are printed on the rating plate.
▶ Write down the serial number in the table below. You will be required to state the product details when
contacting Hilti Service or your local Hilti organization to inquire about the product.
Product information
Rotary hammer TE 6A22
Generation 04
Serial no.
1.5 Declaration of conformity
We declare, on our sole responsibility, that the product described here complies with the applicable directives
and standards. A copy of the declaration issued by the certification department can be found at the end of
this documentation.
The technical documentation is filed here:
Hilti Entwicklungsgesellschaft mbH | Tool Certification | Hiltistrasse 6 | 86916 Kaufering, Germany
2 Safety
2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.