Operating Instruction UD 16, DU 30 (01)

ORIGINAL OPERATING INSTRUCTIONS
UD 16 ‑ UD 30 drill
It is essential that the operating instructions
are read before the power tool is operated for
the first time.
Always keep these operating instructions to-
gether with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to other
persons.
Contents Page
1 General information 1
2Description 2
3 Accessories 4
4 Technical data 4
5 Safety instructions 5
6Beforeuse 7
7 Operation 8
8 Care and maintenance 10
9 Troubleshooting 11
10 Disposal 11
11 Manufacturer’s warranty - tools 11
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out cover
pages. Keep these pages open while studying the oper-
ating instructions.
In these operating instructions, the designation “the
power tool” always refers to the UD 16 or UD 30 electric
drill.
Operating controls and parts 1
@
Chuck (keyless chuck or key chuck with key)
;
Side handle
=
Sleeve (only UD 16)
%
Depth gauge
&
Depth gauge locking screw
(
Function selector switch
)
Forward / reverse switch
+
Control switch with electronic speed control
§
Lockbutton for sustained operation
/
Supply cord
1 General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
seriousbodilyinjuryorfatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
en
1
Printed: 08.07.2013 | Doc-Nr: PUB / 5071282 / 000 / 01