Product Data Sheet (US-EN) FOR CP 680-P, CP 680-M
CAST-IN FIRESTOP DEVICES
(CP 680-P AND CP 680-M)
For use in
• Dust and ber free environments such as hospitals, computer
centers and laboratories
• Concrete oor assemblies rated up to 4 hours
Product description
• A one-step cast-in restop device for a variety of pipe
materials and diameters
• Helps reduce labor costs and increase productivity
• Ready-to-use out of the package
• Internationally tested and approved by UL and FM
• Reduces the chance of project delays due to failed
inspections
Product features
• Quick and simple installation
• SpeedLine Alignment system promotes faster layout
• QuickTurn System creates fast, simple vertical connections
• Integrated moisture and smoke seal
• Innovative adapter for metal deck applications
Installation and applications
• Concrete oors from 2.5" (63 mm) thickness for either at
concrete or concrete over metal deck
CP 680-M:
- Insulated and non-insulated metal pipes
- EMT and electrical conduits
- Cable bundles
- Multiple pipes
CP 680-P:
Addresses all applications for CP 680-M as well as the
following:
- Plastic pipes such as PVC, CPVC, ABS, ENT and FRPP
- Fresh and waste water pipes
Not suited for
• Areas with high condensation
• Outdoor areas
• Wall applications
Installation and applications
Notice
• Before handling, read Material Safety Data Sheet and product
label for safe usage and health information.
• Instructions below are general guidelines — always refer to
the applicable drawing in the UL Fire Resistance Directory
or Hilti Firestop Systems Guide for complete installation
information
Instructions for use
• Before pouring concrete, secure the cover cap in place,
thereby preventing the ow of concrete into the cast-in device
• Do not use for wall applications
GKL • 05/20
Product information
FBC™ System Compatible
indicates that this product has
been tested, and is monitored
on an ongoing basis, to assure
its chemical compatibility with
FlowGuard Gold®, BlazeMaster®
and Corzan® piping systems and
products made with TempRite®
Technology.” “The FBC System
Compatible Logo, FBC™, Flow-
Guard Gold®, BlazeMaster®,
Corzan®, and TempRite® are
trademarks of Lubrizol Advanced
Materials, Inc. or its afliates.”
Hilti Firestop
Saving lives
through innovation
and education
Technical Data CP 680-P and CP 680-M
ID Footprint Opening required thru metal deck
2" 3-3/4" x 4-1/2" 3-1/2" diameter
3" 4-3/4" x 5-5/8" 4-1/2" diameter
4" 6-3/8" x 6-3/4" 5-1/2" diameter
6" 9" x 9-1/2" 7-1/2" diameter
Expansion temperature
392°F (200°C)
Expansion rate
1:50 (unrestrained)
1:30 (Load expansion, Load =
20g/cm
3
)
Standard height
8"
Temperature resistance
Maximum 212°F (100°C)
Color
CP 680-P: red
CP 680-M: black
Tested in accordance with
• UL 1479 • ASTM E 814 • ASTM G21 • CAN/ULC-S115
Internationally tested and approved
CP 680-P in
concrete over
wood forms
FIRESTOP DEVICE
FOR USE IN THROUGH-PENETRATION
FIRESTOP SYSTEMS
SEE UL FIRE RESISTANCE DIRECTORY
5N76
CP 680-M in
concrete over
wood forms
CP 680-P over
metal deck
CP 680-M over
metal deck
Hilti, Inc.
1-800-879-8000 | en español 1-800-879-5000
www.hilti.com