DATE: PROJECT: FROM: TO: SUBJECT: HILTI X-ENP-19, X-HSN 24 or X-U POWDER-ACTUATED FASTENER SUBSTITUTION REQUEST SPECIFICATION TITLE: SECTION: PAGE: ARTICLE/PARAGRAPH: DESCRIPTION: DESIGN DETAIL NO.
Table 1 - Allowable Weld Design Values Pounds Per Inch of Fillet Weld or Per Hilti Powder-Actuated Fastener Fillet Weld 1 X-ENP-19 X-HSN 24 X-U Pourstop Steel Pullover Pullover Tension or Shear Shear Shear Pullover Shear Fu (ksi) 689 20 755 640 560 600 360 445 45 18 875 840 725 785 490 525 45 919 16 940 1050 865 975 685 720 45 1149 14 1125 1050 865 975 825 1085 45 1438 12 1125 1050 865 975 935 1085 45 2013 10 1125 1050 45 2587 20 755 640 560 600 360 445 65 996 18 875 840 725 785 490 525 65 1328 16 940 1050
Table 3 - Hilti X-ENP-19 vs. Fillet Weld (Tension)1,2,3,4,5 Inch of Fillet Weld Pourstop Pourstop Inch of Fillet Weld Gauge (Fu) Gauge (Fu) 1 2 3 4 1 2 3 # of X-ENP-19 fasteners in 1/8" thick base steel (Fy = 50.8 ksi) # of X-ENP-19 fasteners in 3/8" thick base steel (Fy = 36 ksi) 20 GA (45 ksi) 20 GA (45 ksi) 0.91 1.83 2.74 18 GA (45 ksi) 18 GA (45 ksi) 1.05 2.10 3.15 16 GA (45 ksi) 16 GA (45 ksi) 1.22 2.44 3.67 14 GA (45 ksi) 14 GA (45 ksi) 1.28 2.56 3.83 12 GA (45 ksi) 12 GA (45 ksi) 1.79 3.58 5.
Table 4 - Hilti X-ENP-19 vs. Fillet Weld (Shear)1,2,3,4,5 Pourstop Inch of Fillet Weld Pourstop Inch of Fillet Weld Gauge (Fu) Gauge (Fu) 1 2 3 4 1 2 3 # of X-ENP-19 fasteners in 1/8" thick base steel (Fy = 50.8 ksi) # of X-ENP-19 fasteners in 3/8" thick base steel (Fy = 36 ksi) 20 GA (45 ksi) 20 GA (45 ksi) 1.08 2.15 3.23 18 GA (45 ksi) 18 GA (45 ksi) 1.09 2.19 3.28 16 GA (45 ksi) 16 GA (45 ksi) 1.09 2.19 3.28 14 GA (45 ksi) 14 GA (45 ksi) 1.37 2.74 4.11 12 GA (45 ksi) 12 GA (45 ksi) 1.92 3.83 5.
Table 5 - Hilti X-HSN 24 vs. Fillet Weld (Tension)1,2,3,4,5,6 Pourstop Inch of Fillet Weld Pourstop Inch of Fillet Weld Gauge (Fu) Gauge (Fu) 1 2 3 4 1 2 3 # of X-HSN 24 fasteners in 1/8" thick base steel (Fy = 50 ksi) # of X-HSN 24 fasteners in 3/8" thick base steel (Fy = 36 ksi) 20 GA (45 ksi) 1.58 3.17 4.75 6.34 20 GA (45 ksi) 1.23 2.46 3.69 18 GA (45 ksi) 2.11 4.23 6.34 8.45 18 GA (45 ksi) 1.27 2.54 3.80 16 GA (45 ksi) 2.64 5.28 7.92 10.57 16 GA (45 ksi) 1.53 3.06 4.60 14 GA (45 ksi) 3.31 6.61 9.92 13.
Table 6 - Hilti X-HSN 24 vs. Fillet Weld (Shear)1,2,3,4,5,6 Pourstop Inch of Fillet Weld Pourstop Inch of Fillet Weld Gauge (Fu) Gauge (Fu) 1 2 3 4 1 2 3 # of X-HSN 24 fasteners in 1/8" thick base steel (Fy = 50 ksi) # of X-HSN 24 fasteners in 3/8" thick base steel (Fy = 36 ksi) 20 GA (45 ksi) 1.15 2.30 3.45 4.59 20 GA (45 ksi) 1.15 2.30 3.45 18 GA (45 ksi) 1.17 2.34 3.51 4.68 18 GA (45 ksi) 1.17 2.34 3.51 16 GA (45 ksi) 1.18 2.36 3.54 4.71 16 GA (45 ksi) 1.18 2.36 3.54 14 GA (45 ksi) 1.47 2.95 4.42 5.
Table 7 - Hilti X-U vs. Fillet Weld (Tension)1,2,3,4,5 Pourstop Inch of Fillet Weld Pourstop Inch of Fillet Weld Gauge (Fu) 1 2 3 4 1 2 3 Gauge (Fu) # of X-U fasteners in 1/8" thick base steel (Fy = 50 ksi) # of X-U fasteners in 3/8" thick base steel (Fy = 50 ksi) 20 GA (45 ksi) 20 GA (45 ksi) 1.91 3.83 5.74 18 GA (45 ksi) 18 GA (45 ksi) 1.88 3.75 5.63 16 GA (45 ksi) 16 GA (45 ksi) 1.68 3.35 5.03 14 GA (45 ksi) 14 GA (45 ksi) 1.74 3.49 5.23 12 GA (45 ksi) 12 GA (45 ksi) 2.15 4.31 6.
Table 8 - Hilti X-U vs. Fillet Weld (Shear)1,2,3,4,5 Pourstop Inch of Fillet Weld Pourstop Inch of Fillet Weld 1 2 3 4 1 2 3 Gauge (Fu) Gauge (Fu) # of X-U fasteners in 1/8" thick base steel (Fy = 50 ksi) # of X-U fasteners in 3/8" thick base steel (Fy = 50 ksi) 20 GA (45 ksi) 20 GA (45 ksi) 1.55 3.10 4.64 18 GA (45 ksi) 18 GA (45 ksi) 1.75 3.50 5.25 16 GA (45 ksi) 16 GA (45 ksi) 1.60 3.19 4.79 14 GA (45 ksi) 14 GA (45 ksi) 2.00 3.99 5.99 12 GA (45 ksi) 12 GA (45 ksi) 2.80 5.59 8.
Steel Deck Fastening Systems X-ENP-19 for Fastening Deck to Structural Steel 3.5.3 3.5.3.1 Product Description The Hilti structural steel deck fastening system consists of powder-actuated tools which are primarily used with one fastener: the X-ENP-19 L15, which is available either collated or non-collated. For most structural steel decking jobs, the tool of choice is the DX 860-ENP-L tool. This self-contained stand up decking tool is powered by 0.
Steel Deck Fastening Systems X-HSN 24 for Fastening Deck to Bar Joist 3.5.2 3.5.2.1 Product Description The Hilti bar joist deck fastening system consists of powder-actuated tools that are primarily used with the X-HSN 24 fasteners, which are available in a collated version. For many bar joist decking projects, the tool of choice is the DX 860-HSN tool. This self-contained stand up decking tool is powered by 0.27 caliber short cartridges, which are loaded into the tool in strips of 40.
General Construction Fastening Systems 3.2.3 X-U Universal Knurled Shank Fasteners 3.2.3.1 Product Description 3.2.3.1 Product Description 3.2.3.2 Material Specifications 3.2.3.3 Technical Data 3.2.3.4 Ordering Information The Hilti X-U universal knurled shank fastener is designed as a high performance solution to simplify powder-actuated fastener selection. The X-U is one fastener type that performs equally well on both high and standard strength concrete and steel.
General Construction Fastening Systems X-U Universal Knurled Shank Fasteners 3.2.3 Allowable Loads in Minimum f'c = 3000 psi Structural Lightweight Concrete1,4 Fastener X-U Shank Dia. in. (mm) Installed into Concrete Minimum Embed. in. (mm) Tension lb (kN) 3/4 (19) 125 (0.56) 1 (25) 205 (0.91) 0.157 (4.0) 1-1/4 (32) 315 (1.40) 1-1/2 (38) 425 (1.89) Shear lb (kN) 115 (0.51) 260 (1.16) 435 (1.93) 475 (2.
General Construction Fastening Systems 3.2.3 X-U Universal Knurled Shank Fasteners Allowable Tensile Pullover and Shear Bearing Load Capacities for Steel Framing with X-U Powder-Actuated Fasteners1,2,3,4 Fastener Description 0.157" shank with or w/o plastic washers or MX collation Sheet Steel Thickness Head 16 ga. 18 ga. 20 ga. 22 ga. 24 ga. 14 ga. 25/26 ga Dia. Fastener in.