Operating Instruction DCH 230-180-SL (01)

2.16 Cutting disc specifications
Diamond cutting discs in compliance with ANSI B7.1 are to be used with the DCH 230 and DCH 180-SL. Synthetic
resin-bonded fiber-reinforced cutting discs in compliance with ANSI B7.1 (cutting-off wheels of the straight, not offset
type) may also be used with the DCH 230 for working on metals.
The mounting instructions issued by the disc manufacturer must also be observed.
3 Accessories
Designation Item number, description
DCH 230 / 180‑SL conversion set DCH‑EX 180‑SL slitting hood, comprising; spindle ex-
tension; M 6 x65 screw; 5 spacer rings (3 mm, 6 mm,
2 x 13 mm, 21 mm), M 14 clamping nut
Kwik-Lock clamping nut (only for the DCH 230)
Key for quick-release clamping nut
Depth gauge for the DCH 230 212187
Vacuum cleaner from the Hilti range
Antistatic hose, complete 203867, Length 5 m (16.4 ft), ∅36 mm
Hilti toolbox 47986
4 Technical data
Right of technical changes reserved.
Other information about the
power tool
DCH 230 DCH 180‑SL
Ratedvoltage 120V 120V
Rated current input 20 A 20 A
Mains frequency 60 Hz 60 Hz
Dimensions (L x W x H) 670 mm (26.38") x 240 mm (9.45") x
210 mm (8.27")
620 mm (24.41") x 275 mm
(10.83") x 185 mm
(7.28")
Drive spindle thread M 14 M 14
Disc arbor size 22.2 mm (0.87") 22.2 mm (0.87")
Cutting disc ∅ Max. 230 mm (9") ∅ Max. 180 mm (7")
Cutting disc thickness Max. 3 mm (Max. 0.12") Max. 3 mm (Max. 0.12")
Weight of the power tool 8.6 kg (18.96 lb) 9.2 kg (20.28 lb)
Protection class Protection class I (grounded) or
protection class II (double insu-
lated). See type identification plate.
Protection class I (grounded) or
protection class II (double insu-
lated). See type identification plate.
Rated speed under no load Max. 6,500/min Max. 6,500/min
Clamping nut tightening torque M14: 30 Nm (22 lb/ft) M14: 30 Nm (22 lb/ft)
Spindle extension tightening torque 9 Nm (7 lb/ft)
en
5
Printed: 10.04.2017 | Doc-Nr: PUB / 5127702 / 000 / 00Printed: 10.04.2017 | Doc-Nr: PUB / 5127702 / 000 / 01