Operating Instruction DX 351-CT (01)

11 Manufacturer’s warranty - tools
Please contact your local Hilti representative if you have
questions about the warranty conditions.
12 EC declaration of conformity (original)
Designation: Powder-actuated fasten-
ing tool
Type: DX 351‑CT
Generation: 01
Year of design: 2008
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend Tassilo Deinzer
Head of Quality & Processes Manage-
ment
Head of BU Direct Fastening
BU Direct Fastening BU Direct Fastening
04/2013 04/2013
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
13 Confirmation of CIP testing
The Hilti DX 351 CT has been system and type tested.
As a result, the tool bears the rectangular PTB approval
mark showing approval number S 817. Hilti thus guaran-
tees compliance with the approved type. Unacceptable
defects or deficiencies, etc. determined during use of the
tool must be reported to the person responsible at the ap-
proval authority (PTB) and to the Office of the Permanent
International Commission (C.I.P.).
14 Health and safety of the operator
14.1 Noise information
Powder-actuated fastening tool
Type DX 351‑CT
Model Series
Caliber 6.8/11 red
Power regulation 3
Application Fastening 0.75 mm steel sheet to concrete (B35) using
X‑U 27P8
en
13
Printed: 17.04.2014 | Doc-Nr: PUB / 5126210 / 000 / 02