ECONOMICAL MANUAL SET FLUSH ANCHOR Flush anchor HDV technical supplement
PRODUCT DESCRIPTION Hilti HDV Drop-in Anchors are internally threaded, flush-mounted expansion anchors for use in concrete. Product Features •A nchor, setting tool and Hilti drill bit form a matched tolerance system to provide reliable fastenings • Allows shallow embedment without sacrificing performance • Ideal for repetitive fastenings with threaded rods of equal length Guide Specifications Expansion anchors shall be flush or shell type and zinc plated in accordance with ASTM B633, SC 1, Type III.
Flush anchor HDV technical supplement Table 2 - HDV carbon steel allowable loads in concrete1 Nominal anchor diameter in. 1/4 1 2000 psi (13.8 MPa) Tension lb (kN) 385 (1.7) Shear lb (kN) 4000 psi (27.6 MPa) Tension lb (kN) Shear lb (kN) 450 (2.0) 510 (2.3) 625 (2.8) 6000 psi (41.4 MPa) Tension lb (kN) 640 (2.8) Shear lb (kN) 700 (3.1) 3/8 785 (3.5) 965 (4.3) 1070 (4.8) 1250 (5.6) 1360 (6.0) 1500 (6.7) 1/2 1120 (5.0) 1500 (6.7) 1785 (7.9) 2125 (9.5) 2345 (10.4) 2500 (11.
tor Mechanical Anchoring Systems Anchor spacing and edge distance guidelines Anchor Spacing Adjustment Factors Edge Distance Adjustment Factors s c = Actual Spacing = Actual Edge Distance smin = 2.0 hnom cmin = 2.0 hnom ser = 3.5 hnom cer = 3.0 hnom HDV embedment depth for load adjustment factor calculations Anchor Size hnom in. in.
Flush anchor HDV technical supplement INSTALLATION INSTRUCTIONS Manufacturer's Printed Installation Instructions (MPII) are included with each product package. They can also be viewed or downloaded at www.hilti.com (U.S.) and www.hilti.ca (Canada). Because of the possibility of changes, always verify that downloaded MPII are current when used. Proper installation is critical to achieve full performance. Training is available on request.
