Operating Instruction TE 3-M/-C (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Changing the quick-release chuck
- 5.2 Fitting the side handle
- 5.3 Fitting/removing the drill bit or other accessory: SDS quick-release chuck
- 5.4 Fitting/removing the drill bit, chisel or other accessory: Three-jaw chuck
- 5.5 Drilling without hammering
- 5.6 Screwdriving
- 5.7 Drilling with hammering action (hammer drilling)
- 5.8 Setting the chiseling function
- 5.9 Chisel positioning
- 5.10 Forward / reverse
- 5.11 Adjusting the depth gauge
- 5.12 Fitting the dust collection module for overhead work
- 5.13 Pressing/locking the control switch
- 5.14 Replacing the dust shield
- 6 Care of the product
- 7 Troubleshooting
- 8 Disposal
- 9 Manufacturer’s warranty
