Safety Data Sheet (SDS) for HIT-RE 100 Epoxy Adhesive

HIT-RE 100, B
Safety Data Sheet
according to Federal Register / Vol. 77, No. 58 / Monday, March 26, 2012 / Rules and Regulations
07/01/2020
EN (English)
7/30
First-aid measures after ingestion
Do not induce vomiting. Rinse mouth. Immediately call a POISON CENTER/doctor.
4.2. Most important symptoms and effects (acute and delayed)
Potential adverse human health effects and
symptoms
No additional information available.
Symptoms/effects
Causes severe skin burns and eye damage.
Symptoms/effects after inhalation
May cause an allergic skin reaction.
Symptoms/effects after eye contact
Causes serious eye damage.
4.3. Immediate medical attention and special treatment, if necessary
No additional information available
SECTION 5: Fire-fighting measures
5.1. Suitable (and unsuitable) extinguishing media
Suitable extinguishing media
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Unsuitable extinguishing media
Do not use a heavy water stream.
5.2. Specific hazards arising from the chemical
Hazardous decomposition products in case of fire
Thermal decomposition generates : Carbon dioxide. Carbon monoxide.
5.3. Special protective equipment and precautions for fire-fighters
Firefighting instructions
Use water spray or fog for cooling exposed containers. Exercise caution when fighting any
chemical fire. Prevent fire fighting water from entering the environment.
Protection during firefighting
Self-contained breathing apparatus. Do not enter fire area without proper protective equipment,
including respiratory protection.
SECTION 6: Accidental release measures
6.1. Personal precautions, protective equipment and emergency procedures
General measures
Spilled material may present a slipping hazard.
6.1.1. For non-emergency personnel
Emergency procedures
Evacuate unnecessary personnel.
6.1.2. For emergency responders
Protective equipment
Use personal protective equipment as required. Equip cleanup crew with proper protection.
Emergency procedures
Ventilate area.
6.2. Environmental precautions
Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters. Avoid release to the environment. Full or only
partially emptied cartridges must be disposed of as special waste in accordance with official regulations. After curing, the product can be disposed of
with household waste.
6.3. Methods and material for containment and cleaning up
For containment
Collect spillage.
Methods for cleaning up
This material and its container must be disposed of in a safe way, and as per local legislation.
Mechanically recover the product. On land, sweep or shovel into suitable containers. Store away
from other materials.