Operating Instruction TE 700-AVR (01)

English 11
3.6 Restart interlock
The tool doesn’t restart automatically when the power returns after an
interruption in the supply. The on/off switch must first be released and then
pressed again to restart.
3.7 Items supplied
Breaker, side handle, operating instructions.
Note
You can find other system products approved for your product at your
local Hilti Center or online at: www.hilti.com
4 Technical data
4.1 Breaker
Note
For details of the rated voltage, frequency, current and input power,
please refer to the power tool’s country-specific type identification plate.
When powered by a generator or transformer, the generator or transformer’s
power output must be at least twice the rated input power shown on the rating
plate of the power tool. The operating voltage of the transformer or generator
must always be within +5% and -15% of the rated voltage of the power tool.
Single impact energy
11.5 J
Weight
17.4 lb
(7.9 kg)
5 Operation
5.1 Preparations at the workplace
CAUTION
Risk of injury! Inadvertent starting of the product.
▶ Unplug the supply cord before making adjustments to the power tool
or before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
Printed: 02.02.2017 | Doc-Nr: PUB / 5071155 / 000 / 05