Product Technical Guide for MH-EMT45 Strut Clamp

Hilti MI/MQ Technical Guide
5.0 Installation System Hangers
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I MI/MQ Technical Guide 2015
120
MH-EMT Strut clamp — 45EMT
Product Features
• Pre-assembled out of box; tightening screw at 45° angle for
easy access
• Sized for electrical metallic tubing (EMT)
• Pre-galvanized
• Innovative design requires no nuts for fast and easy
assembly
Material Specications
Material
Carbon steel
Finish
Pre-galvanized
Conforms with
• Federal specications WW-H-171E (Type 59)
• Manufacturers Standardization Society MSS-SP-58
(Type 59)
Technical Data
Designation
Bolt Diameter x Length
Wrench
Size
Tightening
Torque
(in-lb)
Material
Thickness
Gauge
A
Dimension
(in)
B
Dimension
(in)
C
Dimension
(in)
MH-EMT45 1/2" PG
5/16"-18 UNC x 3/4" 1/2" 60 16 1.98 0.65 0.82
MH-EMT45 3/4" PG
5/16"-18 UNC x 3/4" 1/2" 60 16 2.20 0.75 1.04
MH-EMT45 1" PG
5/16"-18 UNC x 3/4" 1/2" 60 14 2.47 0.87 1.31
MH-EMT45 1-1/4" PG
5/16"-18 UNC x 1" 1/2" 60 14 2.81 1.05 1.66
MH-EMT45 1-1/2" PG
5/16"-18 UNC x 1" 1/2" 60 14 3.05 1.17 1.89
MH-EMT45 2" PG
5/16"-18 UNC x 1" 1/2" 60 14 3.50 1.39 2.35
Installation Instructions
Ordering Information / Technical Data
Description
Allowable
Load 1
(lb)
1
Allowable
Load 2
(lb)
1
Allowable
Load 3
(lb)
1
Box Qty Item No.
MH-EMT45 1/2" PG
200 50 30 100 2008821
MH-EMT45 3/4" PG
200 50 30 100 2008822
MH-EMT45 1" PG
200 75 40 100 2008823
MH-EMT45 1-1/4" PG
200 75 40 50 2008824
MH-EMT45 1-1/2" PG
200 100 40 50 2008825
MH-EMT45 2" PG
200 100 50 50 2008826
1 Based on a safety factor of 3 for Load 1 and 2.3 for Load 2 and 3 according to AISI 2007.
Allowable loads are based on loading in one direction only.
Load 1
Load 2
Load 3