Product Technical Guide for MH-SLT Speed Lock Trapeze Nut

Hilti MI/MQ Technical Guide
5.0 Installation System Hangers
Hilti, Inc. (US) 1-800-879-8000 | www.us.hilti.com I en español 1-800-879-5000 I Hilti (Canada) Corp. 1-800-363-4458 I www.hilti.ca I MI/MQ Technical Guide 2015
125
Product Features
• Nut and washer can be installed at any position on the
threaded rod, for quick and accurate trapeze building
• Electro-galvanized
• Use split nut only in conjunction with slotted washer and
1-5/8” wide strut
Material Specications
Material
Plate - Carbon Steel, DIN EN 10149-2, S460MC
Nut - SAE 1010, C10C
Finish
Electro-galvanized
Place nut at any location on
threaded rod.
Squeeze nut onto rod Insert slotted washer between
nut and strut
Repeat steps 1-3 on top of
strut
Tighten to specied torque
value
MH-SLT is not intended for
shear loading
Installation Instructions
Technical Data
Description
Allow.
Load
(lb)
Wrench
Size
Tightening
Torque
(ft-lb)
A
Dimension
(in)
B
Dimension
(in)
C
Dimension
(in)
D
Dimension
(in)
Plate
Thickness
mm / (in)
MH-SLT 3/8" EG
745 11/16" 15 1.77 1.89 0.75 0.55 3 / (1/8)
MH-SLT 1/2" EG
1350 7/8" 22 1.77 1.89 0.75 0.55 3 / (1/8)
Based on a safety factor of 3
Ordering Information
Description Designation Torque (M
D
) Qty Item No.
3/8" Split Nut and Slot Square Washer
MH-SLT 3/8" EG 180 in-lb / 15 ft-lb 40 2008780
1/2" Split Nut and Slot Square Washer
MH-SLT 1/2" EG 265 in-lb / 22 ft-lb 40 2008781
A
B
Note: Split Nut (A) must always be used with Slotted Washer (B). Engage by tightening to specied torque.
MH-SLT Speed lock trapeze nut