LEED Information for CFS-DID Firestop Drop-In Device

Hilti, Inc.
5400 South 122
nd
East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
March 1, 2017
To Whom It May Concern:
Re: CFS-DID Metal Firestop Drop in Device – LEED Information
Item Numbers:
2008097
2008098
2008099
2008250
2008251
2008252
2008253
2008254
2008255
2008256
2008257
2008258
2008259
2008260
2008261
2008262
2015574
The Hilti CFS-DID is assembled in Minneapolis, Minnesota from foreign and domestic parts.
The Hilti CFS-DID has a VOC content of 0.19 grams/liter.
The post-consumer recycled content of all steel parts is 25%. The pre-consumer recycled content of all steel parts is not known.
The post-consumer and pre-consumer recycled content of all other components of the CFS-DID, is not known. The metal and
plastic portions of the Hilti CFS-DID are recyclable. The Hilti CFS-DID does not contain any Rapidly Renewable Materials.
The Hilti CFS-DID is not regulated as a hazardous waste by the Federal EPA Standards. The regulations for the disposal of non-
regulated industrial waste can vary from state to state and even city to city. For this reason, you should consult your local and
state regulatory agencies for direction on disposal.
Please feel free to contact me at [phone] if you have questions.
Sincerely,
Jerry Metcalf MPH, CHMM
Sr. Manager Safety/Environmental
Hilti Inc.
[phone]
[e-mail]
Rev. Date: 03/0/2017
The manufacturing plant location on this certificate has been provided for LEEDS reporting purposes only. It should never be used
for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America
requirements, as those requirements differ.
The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. “Specially” produced
non-catalog Hilti products may have differing manufacturing plant locations.
Contact your Hilti representative in cases of “specially” produced products for a custom LEEDS certificates.