Operating Instruction SD 4500 (01)

16 English
7.2 Transport and storage of cordless tools
Transport
CAUTION
Accidental starting during transport !
▶ Always transport your products with the batteries removed!
▶ Remove the battery.
▶ Never transport batteries in bulk form (loose, unprotected).
▶ Check the tool and batteries for damage before use after long periods of
transport.
Storage
CAUTION
Accidental damage caused by defective or leaking batteries !
▶ Always store your products with the batteries removed!
▶ Store the tool and batteries in a place that is as cool and dry as possible.
▶ Never store batteries in direct sunlight, on heating units or behind a
window pane.
▶ Store the tool and batteries in a place where they cannot be accessed by
children or unauthorized persons.
▶ Check the tool and batteries for damage before use after long periods of
storage.
8 Troubleshooting
If the trouble you are experiencing is not listed in this table or you are
unable to remedy the problem by yourself, please contact Hilti Service.
Trouble or fault Possible cause Action to be taken
The screwdriver
doesn’t work.
Low battery. ▶ Charge the battery.
→ page 11
The battery is not in the
working position.
▶ Insert the battery.
→ page 11
The screwdriver
doesn’t work and
one LED blinks.
Low battery. ▶ Insert a charged
battery.
▶ Charge the battery.
→ page 11
The battery is too hot or
too cold.
▶ Bring the battery to
the recommended op-
erating temperature.
Printed: 15.07.2019 | Doc-Nr: PUB / 5295850 / 000 / 02