Operating Instruction GX 3 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Loading the setting tool
- 6 Driving fasteners
- 7 Unloading the setting tool
- 8 Optional operating steps
- 9 Remedying possible malfunctions
- 10 Care and maintenance
- 11 Transport and storage
- 12 Troubleshooting
- 13 Disposal
- 14 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Équipement livré
- 3.4 Canons
- 3.5 Éléments de fixation
- 3.6 Curseur de réglage de la profondeur d'implantation et déverrouillage du canon
- 3.7 Touche RESET
- 3.8 Pied d'appui
- 3.9 Patte d'accrochage à la ceinture
- 3.10 Cartouche de gaz
- 3.11 Indication du niveau de charge de la cartouche de gaz
- 4 Caractéristiques techniques
- 5 Chargement du cloueur
- 6 Implantation d'éléments de fixation
- 7 Déchargement du cloueur
- 8 Opérations optionnelles
- 9 Dépannage
- 10 Nettoyage et entretien
- 11 Transport et stockage
- 12 Aide au dépannage
- 13 Recyclage
- 14 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Guía clavos
- 3.5 Elementos de fijación
- 3.6 Corredera para el ajuste de la profundidad de fijación y el desbloqueo del guía clavos
- 3.7 Tecla RESET (reinicio)
- 3.8 Pie de apoyo
- 3.9 Colgador de cinturón
- 3.10 Carga de gas
- 3.11 Indicador del estado de la carga de gas
- 4 Datos técnicos
- 5 Carga de la fijadora
- 6 Colocación de elementos de fijación
- 7 Descarga de la fijadora
- 8 Pasos de manejo opcionales
- 8.1 Comprobación del estado de la carga de gas
- 8.2 Extracción del cargador
- 8.3 Colocación del cargador
- 8.4 Extracción del guía clavos
- 8.5 Colocación del guía clavos
- 8.6 Desmontaje del pie de apoyo
- 8.7 Montaje del pie de apoyo
- 8.8 Colocación del adaptador para una fijación única
- 8.9 Retirada del adaptador para una fijación única
- 9 Reparación de averías
- 10 Cuidado y mantenimiento
- 11 Transporte y almacenamiento
- 12 Ayuda en caso de averías
- 13 Reciclaje
- 14 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização correcta
- 3.3 Incluído no fornecimento
- 3.4 Guias de pregos
- 3.5 Elementos de fixação
- 3.6 Cursor para ajuste da profundidade de fixação e desbloqueio da guia de pregos
- 3.7 Tecla RESET
- 3.8 Pé de apoio
- 3.9 Gancho de cinto
- 3.10 Lata de gás
- 3.11 Indicação do estado da lata de gás
- 4 Características técnicas
- 5 Carregamento da ferramenta de fixação
- 6 Fixação de elementos de fixação
- 7 Descarga da ferramenta de fixação
- 8 Passos de operação opcionais
- 9 Resolução de avarias
- 10 Conservação e manutenção
- 11 Transporte e armazenamento
- 12 Ajuda em caso de avarias
- 13 Reciclagem
- 14 Garantia do fabricante
6 English 2126636
*2126636*
Status Meaning
+
• Standard fastener driving depth
• Reduced fastener driving depth
EJECT
• Fastener guide release
3.7 RESET button
After driving a fastener, under certain circumstances, the fastener guide may not return to its outset position.
This is caused by the piston being incorrectly positioned. The incorrect piston position can be remedied by
pressing the RESET button.
Status Meaning
RESET button projects from the tool casing. Its
white edge is visible.
• Piston position is incorrect
RESET button is flush with the tool casing.
• Piston position is correct
3.8 Support leg
On an even working surface, the support leg makes it easier to hold the fastening tool perpendicular as
attention then only has to be paid to lateral alignment. On an uneven or undulating surface it may be necessary
to remove the support leg in order to allow the fastener guide to be held perpendicular to the working surface.
3.9 Belt hook
The belt hook can be extended in two stages.
Status Meaning
First position • Position for attaching to a waist belt
Second position • Position for attaching to ladders, scaffolds,
platforms, etc.
3.10 Gas can
Observe the safety instructions provided with the gas can!
In order to operate the fastening tool, the gas can must be inserted in the gas can compartment.
The gas can status can be read from the LED display after pressing the GAS button.
The gas can must be removed before breaks between working, before maintenance and before transporting
or storing the fastening tool.
3.11 Indication of gas can status
After pressing the GAS button, the LED display indicates the status of the gas can.
The gas level indicator does not operate correctly if the fastener guide / tool nosepeice has been fully
compressed.
Status Meaning
All four LEDs light green. • Level is approx. 100 %.
Three LEDs light green. • Level is approx. 75 %.
Two LEDs light green. • Level is approx. 50 %.
One LED lights green. • Level is approx. 25 %.
One LED blinks green. • Level is below 10 %. Replacement of the gas
can is recommended.
One LED lights red. • There is either no gas can in the fastening tool,
the wrong type of gas can is fitted or the can is
empty.
Printed: 07.06.2018 | Doc-Nr: PUB / 5261663 / 000 / 02