Operating Instruction GX 3 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Loading the setting tool
- 6 Driving fasteners
- 7 Unloading the setting tool
- 8 Optional operating steps
- 9 Remedying possible malfunctions
- 10 Care and maintenance
- 11 Transport and storage
- 12 Troubleshooting
- 13 Disposal
- 14 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Équipement livré
- 3.4 Canons
- 3.5 Éléments de fixation
- 3.6 Curseur de réglage de la profondeur d'implantation et déverrouillage du canon
- 3.7 Touche RESET
- 3.8 Pied d'appui
- 3.9 Patte d'accrochage à la ceinture
- 3.10 Cartouche de gaz
- 3.11 Indication du niveau de charge de la cartouche de gaz
- 4 Caractéristiques techniques
- 5 Chargement du cloueur
- 6 Implantation d'éléments de fixation
- 7 Déchargement du cloueur
- 8 Opérations optionnelles
- 9 Dépannage
- 10 Nettoyage et entretien
- 11 Transport et stockage
- 12 Aide au dépannage
- 13 Recyclage
- 14 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Guía clavos
- 3.5 Elementos de fijación
- 3.6 Corredera para el ajuste de la profundidad de fijación y el desbloqueo del guía clavos
- 3.7 Tecla RESET (reinicio)
- 3.8 Pie de apoyo
- 3.9 Colgador de cinturón
- 3.10 Carga de gas
- 3.11 Indicador del estado de la carga de gas
- 4 Datos técnicos
- 5 Carga de la fijadora
- 6 Colocación de elementos de fijación
- 7 Descarga de la fijadora
- 8 Pasos de manejo opcionales
- 8.1 Comprobación del estado de la carga de gas
- 8.2 Extracción del cargador
- 8.3 Colocación del cargador
- 8.4 Extracción del guía clavos
- 8.5 Colocación del guía clavos
- 8.6 Desmontaje del pie de apoyo
- 8.7 Montaje del pie de apoyo
- 8.8 Colocación del adaptador para una fijación única
- 8.9 Retirada del adaptador para una fijación única
- 9 Reparación de averías
- 10 Cuidado y mantenimiento
- 11 Transporte y almacenamiento
- 12 Ayuda en caso de averías
- 13 Reciclaje
- 14 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização correcta
- 3.3 Incluído no fornecimento
- 3.4 Guias de pregos
- 3.5 Elementos de fixação
- 3.6 Cursor para ajuste da profundidade de fixação e desbloqueio da guia de pregos
- 3.7 Tecla RESET
- 3.8 Pé de apoio
- 3.9 Gancho de cinto
- 3.10 Lata de gás
- 3.11 Indicação do estado da lata de gás
- 4 Características técnicas
- 5 Carregamento da ferramenta de fixação
- 6 Fixação de elementos de fixação
- 7 Descarga da ferramenta de fixação
- 8 Passos de operação opcionais
- 9 Resolução de avarias
- 10 Conservação e manutenção
- 11 Transporte e armazenamento
- 12 Ajuda em caso de avarias
- 13 Reciclagem
- 14 Garantia do fabricante
*2126636*
2126636 English 1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶
Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
Wireless data transfer
Printed: 07.06.2018 | Doc-Nr: PUB / 5261663 / 000 / 02