Operating Instruction GX 3 (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Loading the setting tool
- 6 Driving fasteners
- 7 Unloading the setting tool
- 8 Optional operating steps
- 9 Remedying possible malfunctions
- 10 Care and maintenance
- 11 Transport and storage
- 12 Troubleshooting
- 13 Disposal
- 14 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Équipement livré
- 3.4 Canons
- 3.5 Éléments de fixation
- 3.6 Curseur de réglage de la profondeur d'implantation et déverrouillage du canon
- 3.7 Touche RESET
- 3.8 Pied d'appui
- 3.9 Patte d'accrochage à la ceinture
- 3.10 Cartouche de gaz
- 3.11 Indication du niveau de charge de la cartouche de gaz
- 4 Caractéristiques techniques
- 5 Chargement du cloueur
- 6 Implantation d'éléments de fixation
- 7 Déchargement du cloueur
- 8 Opérations optionnelles
- 9 Dépannage
- 10 Nettoyage et entretien
- 11 Transport et stockage
- 12 Aide au dépannage
- 13 Recyclage
- 14 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Guía clavos
- 3.5 Elementos de fijación
- 3.6 Corredera para el ajuste de la profundidad de fijación y el desbloqueo del guía clavos
- 3.7 Tecla RESET (reinicio)
- 3.8 Pie de apoyo
- 3.9 Colgador de cinturón
- 3.10 Carga de gas
- 3.11 Indicador del estado de la carga de gas
- 4 Datos técnicos
- 5 Carga de la fijadora
- 6 Colocación de elementos de fijación
- 7 Descarga de la fijadora
- 8 Pasos de manejo opcionales
- 8.1 Comprobación del estado de la carga de gas
- 8.2 Extracción del cargador
- 8.3 Colocación del cargador
- 8.4 Extracción del guía clavos
- 8.5 Colocación del guía clavos
- 8.6 Desmontaje del pie de apoyo
- 8.7 Montaje del pie de apoyo
- 8.8 Colocación del adaptador para una fijación única
- 8.9 Retirada del adaptador para una fijación única
- 9 Reparación de averías
- 10 Cuidado y mantenimiento
- 11 Transporte y almacenamiento
- 12 Ayuda en caso de averías
- 13 Reciclaje
- 14 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização correcta
- 3.3 Incluído no fornecimento
- 3.4 Guias de pregos
- 3.5 Elementos de fixação
- 3.6 Cursor para ajuste da profundidade de fixação e desbloqueio da guia de pregos
- 3.7 Tecla RESET
- 3.8 Pé de apoio
- 3.9 Gancho de cinto
- 3.10 Lata de gás
- 3.11 Indicação do estado da lata de gás
- 4 Características técnicas
- 5 Carregamento da ferramenta de fixação
- 6 Fixação de elementos de fixação
- 7 Descarga da ferramenta de fixação
- 8 Passos de operação opcionais
- 9 Resolução de avarias
- 10 Conservação e manutenção
- 11 Transporte e armazenamento
- 12 Ajuda em caso de avarias
- 13 Reciclagem
- 14 Garantia do fabricante
4 English 2126636
*2126636*
▶ Select the correct combination of fastener guide and fastener. The wrong combination may result in
damage to the tool and in reduced fastening quality.
▶ Always observe the application guidelines .
Hazards presented by electricity
▶ Before beginning work, check the working area (e.g. using a metal detector) to ensure that no concealed
electric cables or gas and water pipes are present.
▶ Hold the setting tool only by the insulated grip when working in areas where fasteners may be driven
inadvertently into concealed electric cables. Contact with a live electric cable may cause metal parts of
the tool also to become live, leading to a risk of electric shock.
Instructions for handling the propellant gas
▶ Observe the instructions printed on the gas can and in the accompanying information.
▶ Escaping gas is harmful to the lungs, skin and eyes. Keep your face and eyes away from the gas can
compartment for up to about 10 seconds after removing the gas can.
▶ Do not operate the gas can valve manually.
▶ If a person has inhaled gas, take the person into the open air or into a well-ventilated area and place the
person in a comfortable position. Consult a doctor if necessary.
▶ Call a doctor if the person is unconscious. Bring the person into a well-ventilated area and place the
person in the stable recovery position (i.e. lying on the side). If the person is not breathing, administer
artificial respiration and, if necessary, supply oxygen.
▶ After eye contact with gas, rinse the open eyes thoroughly under running water for several minutes.
▶ After skin contact with gas, wash the contact area carefully with soap and warm water. Subsequently
apply a skin cream.
General instructions concerning personal safety
▶ Take care to adopt an ergonomic body position. Work from a safe stance and take care to stay in balance
at all times. This will allow you to control the setting tool better, even in unexpected situations.
▶ Keep other people away from the working area, especially children.
Printed: 07.06.2018 | Doc-Nr: PUB / 5261663 / 000 / 02