OSHA 1926.1153, Section VII (2)

HILTI SUBMITTAL PACKAGE

OSHA 1926.1153 TABLE 1,

SECTION vii

Section vii: Handheld and

stand-mounted drills

(including impact and

rotary hammer drills)

All Hilti hollow drill bits:

TE-CD (SDS+)

TE-YD (SDS-max)

DBS • 08/17

For instructions on how to assemble

these systems, please refer to the

Hilti North America Youtube page

PAGE 1
HILTI SUBMITTAL PACKAGE OSHA 1926.
PAGE 2
TABLE 1 REQUIREMENTS These systems fall under table 1, section vii: handheld and stand-mounted drills (including impact and rotary hammer drills).
PAGE 3
Hollow Drill Bit Submittal SYSTEM OVERVIEW Hilti rotary hammers with a hollow drill bit are table 1 compliant through use of a hollowed out drill bit hooked up to a vacuum that meets table 1 requirements.
PAGE 4
Tool Accessory Vacuum (use any) TE 50-AVR VC 125-6 VC 125-9 VC 20-U VC 150-6 X VC 150-6 XE VC 40-U VC 150-10 X VC 40-UE VC 150-10 XE VC 300-17 X TE 60-AVR TE 60-ATC/AVR TE-YD hollow drill bits TE 70-AVR TE 70-ATC/AVR TE 80-ATC/AVR Note: previous generations of tools may have different item numbers or nomenclature.