Operating Instruction TE 3-M/-C (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 Changing the quick-release chuck
- 5.2 Fitting the side handle
- 5.3 Fitting/removing the drill bit or other accessory: SDS quick-release chuck
- 5.4 Fitting/removing the drill bit, chisel or other accessory: Three-jaw chuck
- 5.5 Drilling without hammering
- 5.6 Screwdriving
- 5.7 Drilling with hammering action (hammer drilling)
- 5.8 Setting the chiseling function
- 5.9 Chisel positioning
- 5.10 Forward / reverse
- 5.11 Adjusting the depth gauge
- 5.12 Fitting the dust collection module for overhead work
- 5.13 Pressing/locking the control switch
- 5.14 Replacing the dust shield
- 6 Care of the product
- 7 Troubleshooting
- 8 Disposal
- 9 Manufacturer’s warranty
English 5
3 Description
3.1 Parts of the tool and operating controls
@
Three-jaw chuck (TE 3-M)
;
SDS quick-release chuck
=
Chuck locking ring
%
Connection for the dust collection module
&
Depth gauge
(
Forward / reverse switch
)
Control switch lock
+
Control switch
§
Supply cord
/
Function selector switch
:
Depth gauge release button
∙
Side handle
3.2 Intended use
The product described is an electrically powered rotary hammer. It is designed for drilling in concrete,
masonry, drywall / gypsum board, plastic, wood, metal and for driving and removing screws. The product
can also be used for light chiseling work on masonry and surface finishing on concrete.
Hilti products are designed for professional use and may be operated, serviced and maintained only by
trained, authorized personnel. This personnel must be informed of any particular hazards that may be
encountered. The product described and its ancillary equipment may present hazards when used incorrectly
by untrained personnel or when used not as directed.
▶ The tool may be operated only when connected to a power supply providing a voltage and frequency in
compliance with the information given on its type plate.
▶ Observe the national health and safety requirements.
▶ To reduce the risk of injury, use only genuine Hilti tools and accessories.
Printed: 20.12.2018 | Doc-Nr: PUB / 5245522 / 000 / 04