Operating Instruction X-PT 5
Table Of Contents
6 English
4.2 Fastening accessories
Note
Never press the tool against the working surface at an angle. Always work at right angles to the
surface into which the fasteners are to be driven.
Hold the tool with the extension at right angles to the surface into which the fasteners are to be driven.
Press the nose of the tool against the surface.
Pull the trigger.
4.3 Grip section
The grip section can be rotated at any time to bring it into a comfortable working position.
Printed: 30.03.2017 | Doc-Nr: PUB / 5341689 / 000 / 00