-EF, X-FCM-R_(NG), X-FCM-M-(NG) and X-FCS-R fastening system in off-shore and shipbuilding application

THE SCHEDULE OF APPROVAL

1. PRODUCT DESCRIPTION:

The Hilti S-BT fasteners are threaded studs manufactured from hardened carbon steel 1038 and austenitic-ferritic (Duplex)

stainless steel 1.4462. The S-BT threaded studs are fasteners with male threads (metric M8 and M10 or inch W10) for

attachment on one end and a threaded tip on the other end for embedment into the structural steel or aluminium. Carbon steel

studs are supplied with an aluminium sealing washer Ø 10 mm, stainless steel studs are supplied with a stainless steel sealing

washer Ø 12 mm, both with an chloroprene rubber sealing ring. Fastenings are made by screwing in the S-BT stud in a

predrilled pilot hole (without penetration of the base material) or a drill through hole. The Hilti S-BT mechanical fastening

system comprises the Hilti drilling tool, Hilti step drill bit, setting tool, depth gauge, screw-in stainless steel and carbon steel

threaded studs S-BT and accessories.

Identification of components:

Component name Designation

S-BT-MR M10/15 SN 6 Stainless steel threaded stud M10 with sealing washer

S-BT-MR MT M10/15 SN 6 Stainless steel threaded stud M10 with sealing washer

S-BT-MR M10/15 SN 6 AL Stainless steel threaded stud M10 with sealing washer

S-BT-MR W10/15 SN 6 Stainless steel threaded stud W10 with sealing washer

S-BT-MR W10/15 SN 6 AL Stainless steel threaded stud W10 with sealing washer

S-BT-MF M10/15 AN 6 Carbon steel threaded stud M10 with sealing washer

S-BT-MF MT M10/15 AN 6 Carbon steel threaded stud M10 with sealing washer

S-BT-MF W10/15 AN 6 Carbon steel threaded stud W10 with sealing washer

S-BT-MR M10/15 SN 5 Stainless steel threaded stud M10 with sealing washer

S-BT-MR W10/15 SN 5 Stainless steel threaded stud W10 with sealing washer

S-BT-MR M8/15 SN 6 Stainless steel threaded stud M8 with sealing washer

S-BT-MR M8/15 SN 6 AL Stainless steel threaded stud M8 with sealing washer

S-BT-MR M8/7 SN 6 Stainless steel threaded stud M8 with sealing washer

S-BT-MR MT M8/7 SN 6 Stainless steel threaded stud M8 with sealing washer

S-BT-MR M8/7 SN 6 AL Stainless steel threaded stud M8 with sealing washer

S-BT-GR M8/7 SN 6 Stainless steel threaded stud M8 with sealing washer

S-BT-GR NG M8/7 SN 6 Stainless steel threaded stud M8 with sealing washer

S-BT-GR M8/7 SN 6 AL Stainless steel threaded stud M8 with sealing washer

S-BT-MF M8/15 AN 6 Carbon steel threaded stud M8 with sealing washer

S-BT-MF M8/7 AN 6 Carbon steel threaded stud M8 with sealing washer

S-BT-MF MT M8/7 AN 6 Carbon steel threaded stud M8 with sealing washer

S-BT-GF M8/7 AN 6 Carbon steel threaded stud M8 with sealing washer

S-BT-GF NG M8/7 AN 6 Carbon steel threaded stud M8 with sealing washer

S-BT-MR M8/15 SN 5 Stainless steel threaded stud M8 with sealing washer

S-BT-MR M8/7 SN 5 Stainless steel threaded stud M8 with sealing washer

S-BT-GR M8/7 SN 5 Stainless steel threaded stud M8 with sealing washer

S-BT-ER M10/15 SN 6 Stainless steel threaded stud M10 with sealing washer for electrical connections

S-BT-ER W10/15 SN 6 Stainless steel threaded stud W10 with sealing washer for electrical connections

S-BT-EF M10/15 AN 6 Carbon steel threaded stud M10 with sealing washer for electrical connections

S-BT-EF W10/15 AN 6 Carbon steel threaded stud W10 with sealing washer for electrical connections

S-BT-ER M8/15 SN 6 Stainless steel threaded stud M8 with sealing washer for electrical connections

S-BT-EF M8/15 AN 6 Carbon steel threaded stud M8 with sealing washer for electrical connections

S-BT-ER M10 HC 35

Stainless steel threaded stud M10 with sealing washer and grounding equipment