LEED Information for Kwik CON II+ Screw Anchors

Hilti, Inc.
5400 S outh 122
nd
East Avenue
Tulsa, OK 74146
1-800-879-8000
www.hilti.com
January 16, 2020
To Whom It May Concern:
Re: Hilti Kwik-Con II+ Screws – LEED Information
Item Numbers:
433001
433003
433004
433006
433007
433008
433009
433010
433011
433013
433015
433016
433018
433019
433020
433021
433022
433023
433024
433025
433026
433027
433028
433029
433030
433031
433032
433033
433034
433035
433036
433037
433038
433039
433040
433042
433044
433045
433046
433047
433048
433049
433050
433051
433053
433054
The Hilti Kwik-Con II+ screw anchors are manufactured in the United States.
The Hilti Kwik-Con II+ screw anchors are manufactured from either carbon steel or stainless steel and are recyclable. The post-
consumer recycled steel content is 25%. The pre-consumer recycled steel content is not known.
The VOC content for Kwik-Con II+ screw anchor is 0 grams/liter.
Please feel free to contact me at [phone] if you have questions.
Sincerely,
Jerry Metcalf MPH, CHMM
Sr. Manager, Safety/Environmental
Hilti Inc.
918 872 3704
[e-mail]
Rev. Date: 1/16/20
The manufacturing plant location on this certificate has been provided for LEED reporting purposes only. It should never be used
for Country of Origin certification or a representation of compliance/non-compliance with Buy American or Buy America
requirements, as those requirements differ.
The manufacturing plant location(s) identified on the certificate represent standard Hilti catalog products only. “Specially” produced
non-catalog Hilti products may have differing manufacturing plant locations.
Contact your Hilti representative in cases of “specially” produced products for a custom LEED certificates.