Operating Instruction DCH 300 / DCH 300-X (01)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 4 Technical data
- 5 Operation
- 5.1 General information
- 5.2 Fitting a diamond cutting disc
- 5.3 Fitting a synthetic resin-bonded fiber-reinforced cutting disc
- 5.4 Removing the cutting disc
- 5.5 Fitting the depth gauge (optional)
- 5.6 Removing the depth gauge
- 5.7 Setting the cutting depth on the depth gauge
- 5.8 Adjusting the guard
- 5.9 Connecting the water supply
- 5.10 Adjusting the water flow rate
- 5.11 Disconnecting the water supply
- 5.12 Switching on the cutter
- 5.13 Working safely with the cutter
- 5.14 Switching the cutter off
- 6 Care and maintenance
- 7 Transport and storage
- 8 Troubleshooting
- 9 Disposal
- 10 Manufacturer’s warranty
