Smart Label AI L2 AI L5 English Printed: 15.03.
Printed: 15.03.
1 Safety 1.1 General safety instructions Read all safety instructions and other instructions. Keep all safety instructions and other instructions for future reference. General safety instructions ▶ Do not cover the type identification plate or other labels. ▶ Do not cover openings in the casing of the tool or appliance. ▶ Do not obstruct switches, displays and warning lights.
.2 Do not crease or fold Do not crease or fold the Smart Label. 4.3 Surfaces with a large radius Do not apply the Smart Label to surfaces with a diameter of less than 100 mm (3.94"). 4.4 Do not touch the adhesive surface Do not touch or contaminate the adhesive surface of the Smart Label when you remove it from the roll. 4.5 Positions for application of the Smart Label Apply the Smart Label only to protected surfaces. Take care to ensure that the Smart Label does not project beyond an edge.
Application 5.1 Cleaning the surface Before applying the Smart Label, clean the surface thoroughly to remove all traces of contaminants, especially oil and grease. We recommend use of a suitable cleaning agent and a lint-free cleaning cloth. Dry the surface thoroughly in order to achieve optimum adhesion. 5.2 Application pressure Press the Smart Label into place with the heel of the hand or using a roller, applying even pressure. High pressure increases the adhesion of the Smart Label.
Printed: 15.03.
Printed: 15.03.
Hilti = registered trademark of Hilti Corp., Schaan Printed: 15.03.