MQM WING NUT WITH HAC-30 ANCHOR CHANNEL Technical Datasheet March 2020, Version 1.
TECHNICAL DATA The technical data provided below are valid for the MQM wing nut in combination with the HAC-30 anchor channel. The HBC-B channel bolt is engineered to provide the maximum performance in combination with the HAC-30 anchor channel.
Resistance values under shear load in direction of the longitudinal axis of the channel – steel failure M12(-F) MQM Wing nut diameter Connection between channel lips and channel bolt Characteristic resistance VRk,sl,x [kN] Design resistance VRd,sl,x [kN] Screw / Rod 4.6 Screw / Rod 8.8 Screw / Rod 4.6 Screw / Rod 8.8 2.4 0.
INSTALLATION INSTRUCTIONS Installation instructions for MQM wing nut with HAC-30 anchor channel Select the Hilti MQM wing nut in accordance with the design specifications 1 2 90° 30 MQM MQM // MQM-... MQM-... 30 3) To slide the wing nut simply push it slightly into the channel profile and move to desired direction MQM MQM HAC-30 1 1 2 2 90° 90° 30 CHA 30 CHA min (t+L) t 2088637-02.2020 2088637-02.2020 3 3 2 2 SW 30 CHA 30 CHA 1 1 30 CHA 30 CHA SW 4.6 L SW 8.
Hilti Aktiengesellschaft 9494 Schaan, Liechtenstein P +423-234-2111 March, 1st 2020 www.facebook.com/hiltigroup www.hilti.com Hilti = registered trademark of Hilti Corp., Schaan W4532 0920 0-en 1 Printed in Germany © 2019 Right of technical and programme changes reserved S. E. & O Item no. 2095042.
