Operating Instruction AG 500-11S (05)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent product protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5M dust hood for grinding (accessory)
- 3.12 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Operation
- 8 Care of the product
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Régulateur électronique de limitation du courant de démarrage
- 3.5 Système électronique de maintien de la vitesse de rotation / Régulateur de vitesse électronique
- 3.6 Active Torque Control (ATC)
- 3.7 Blocage contre toute mise en marche intempestive
- 3.8 Système de protection thermique
- 3.9 Cache avant pour carter de protection
- 3.10 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.11 Capot dépoussiéreur (rainurage) DC-EX 125/5M (accessoire)
- 3.12 Capot dépoussiéreur (tronçonnage) DC-EX 125/5C (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Mise en service
- 6.1 Montage de la poignée latérale
- 6.2 Carter de protection
- 6.3 Montage ou démontage du cache avant
- 6.4 Montage ou démontage des disques
- 6.4.1 Montage du disque à meuler
- 6.4.2 Démontage du disque à meuler
- 6.4.3 Montage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.4 Démontage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.5 Montage de l'outil amovible avec filetage intégré
- 6.4.6 Démontage de l'outil amovible avec filetage intégré
- 6.5 Montage de la brosse métallique
- 6.6 Montage du disque en fibres
- 7 Utilisation
- 8 Entretien du produit
- 9 Transport et entreposage
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Limitación de la corriente de arranque
- 3.5 Electrónica constante/electrónica de regulación del tacómetro
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueo de rearranque
- 3.8 Protección del producto sujeta a la temperatura
- 3.9 Tapa delantera para caperuza protectora
- 3.10 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.11 Protector antipolvo (ranurado) DC-EX 125/5M (accesorios)
- 3.12 Protector antipolvo (tronzado) DC-EX 125/5C (accesorio)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Puesta en servicio
- 6.1 Montaje de la empuñadura lateral
- 6.2 Caperuza protectora
- 6.3 Montaje y desmontaje de la tapa delantera
- 6.4 Montaje y desmontaje de los discos
- 6.4.1 Montaje del disco lijador
- 6.4.2 Desmontaje del disco lijador
- 6.4.3 Montaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.4 Desmontaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.5 Montaje del útil con rosca integrada
- 6.4.6 Desmontaje del útil de inserción con rosca integrada
- 6.5 Montaje del cepillo de alambre
- 6.6 Montaje del disco de fibra
- 7 Manejo
- 8 Cuidado del producto
- 9 Transporte y almacenamiento
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Regulação da corrente de arranque
- 3.5 Velocidade electrónica constante
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueio de arranque
- 3.8 Protecção do produto dependente da temperatura
- 3.9 Tampa dianteira para resguardo de disco
- 3.10 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.11 Dispositivo de extracção de pó (abrir roços) DC-EX 125/5M (acessórios)
- 3.12 Dispositivo de extracção de pó (cortar) DC-EX 125/5C (acessórios)
- 4 Consumíveis
- 5 Características técnicas
- 6 Antes de iniciar a utilização
- 7 Utilização
- 8 Manutenção do produto
- 9 Transporte e armazenamento
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
*2141935*
2141935 English 11
3.7 Restart interlock
The product does not restart by itself when the on/off switch is locked in the
ON position and power is restored after an interruption in the electric supply.
The on/off switch must first be released and then pressed again.
3.8 Temperature-dependent product protection
The temperature-dependent motor protection system monitors current input
and motor temperature and thus prevents the power tool overheating.
If the motor is overloaded through application of excessive working pressure,
the product’s performance drops noticeably or it might stall completely.
A standstill should be avoided. No specific value can be given for the
permissible overloading limit for the power tool as it depends on motor
temperature.
3.9 Front cover for the disc guard 2
When grinding with straight grinding discs and cutting with cutting discs
in metalworking applications, use the standard guard with front cover.
3.10 DG-EX 125/5" dust hood for grinding (accessory) 3
The grinding system is suitable only for occasional use with diamond cup
wheels for grinding mineral materials.
CAUTION Use of this hood for working on metal is prohibited.
3.11 DC-EX 125/5"M dust hood for grinding (accessory) 4
The power tool may be used for cutting and slitting work on mineral materials
only when fitted with a dust hood.
CAUTION Use of this hood for working on metal is prohibited.
3.12 DC-EX 125/5"C dust hood for cutting (accessory) 5
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diam-
eter of Ø 5" and a maximum disc thickness of 1/4" (grinding discs) or 1/8"
(cutting discs) which are approved for use at a rotational speed of at least
11,500/min and a peripheral speed of 80 m/s may be used.
WARNING! When cutting or slitting with cutting discs, always use the
standard guard with additional cover plate.
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01