Operating Instruction AG 500-11S (05)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent product protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5M dust hood for grinding (accessory)
- 3.12 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Operation
- 8 Care of the product
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Régulateur électronique de limitation du courant de démarrage
- 3.5 Système électronique de maintien de la vitesse de rotation / Régulateur de vitesse électronique
- 3.6 Active Torque Control (ATC)
- 3.7 Blocage contre toute mise en marche intempestive
- 3.8 Système de protection thermique
- 3.9 Cache avant pour carter de protection
- 3.10 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.11 Capot dépoussiéreur (rainurage) DC-EX 125/5M (accessoire)
- 3.12 Capot dépoussiéreur (tronçonnage) DC-EX 125/5C (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Mise en service
- 6.1 Montage de la poignée latérale
- 6.2 Carter de protection
- 6.3 Montage ou démontage du cache avant
- 6.4 Montage ou démontage des disques
- 6.4.1 Montage du disque à meuler
- 6.4.2 Démontage du disque à meuler
- 6.4.3 Montage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.4 Démontage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.5 Montage de l'outil amovible avec filetage intégré
- 6.4.6 Démontage de l'outil amovible avec filetage intégré
- 6.5 Montage de la brosse métallique
- 6.6 Montage du disque en fibres
- 7 Utilisation
- 8 Entretien du produit
- 9 Transport et entreposage
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Limitación de la corriente de arranque
- 3.5 Electrónica constante/electrónica de regulación del tacómetro
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueo de rearranque
- 3.8 Protección del producto sujeta a la temperatura
- 3.9 Tapa delantera para caperuza protectora
- 3.10 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.11 Protector antipolvo (ranurado) DC-EX 125/5M (accesorios)
- 3.12 Protector antipolvo (tronzado) DC-EX 125/5C (accesorio)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Puesta en servicio
- 6.1 Montaje de la empuñadura lateral
- 6.2 Caperuza protectora
- 6.3 Montaje y desmontaje de la tapa delantera
- 6.4 Montaje y desmontaje de los discos
- 6.4.1 Montaje del disco lijador
- 6.4.2 Desmontaje del disco lijador
- 6.4.3 Montaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.4 Desmontaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.5 Montaje del útil con rosca integrada
- 6.4.6 Desmontaje del útil de inserción con rosca integrada
- 6.5 Montaje del cepillo de alambre
- 6.6 Montaje del disco de fibra
- 7 Manejo
- 8 Cuidado del producto
- 9 Transporte y almacenamiento
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Regulação da corrente de arranque
- 3.5 Velocidade electrónica constante
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueio de arranque
- 3.8 Protecção do produto dependente da temperatura
- 3.9 Tampa dianteira para resguardo de disco
- 3.10 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.11 Dispositivo de extracção de pó (abrir roços) DC-EX 125/5M (acessórios)
- 3.12 Dispositivo de extracção de pó (cortar) DC-EX 125/5C (acessórios)
- 4 Consumíveis
- 5 Características técnicas
- 6 Antes de iniciar a utilização
- 7 Utilização
- 8 Manutenção do produto
- 9 Transporte e armazenamento
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
16 English 2141935
*2141935*
6.4.3 Fitting a grinding disc secured with a Kwik lock nut 10
CAUTION
Risk of breakage. Heavy wear (abrasion) may cause the Kwik lock nut to
break.
▶
When working with the power tool, make sure that the Kwik lock nut
doesn’t come into contact with the working surface.
▶
Do not use a damaged Kwik lock nut.
The optional Kwik lock nut can be used instead of the standard
clamping nut. Grinding discs can then be changed without the need for
additional tools.
1. Disconnect the mains plug from the power outlet.
2. Clean the clamping flange and the quick-release clamping nut.
3. Fit the clamping flange onto the drive spindle.
4. Fit the grinding disc.
5.
Screw on the Kwik lock nut until it is seated against the grinding disc.
➥
The name Kwik lock should be visible when the nut is screwed on.
6. Press the spindle lockbutton and hold it in this position.
7. Turn the grinding disc firmly by hand in a clockwise direction until
the Kwik lock nut is tightened securely and then release the spindle
lockbutton.
6.4.4 Removing a grinding disc secured with a Kwik lock nut
1. Disconnect the mains plug from the power outlet.
CAUTION
Risk of breakage and irreparable damage. If the spindle lockbutton is
pressed while the spindle is rotating, the accessory tool can detach from the
power tool.
▶ Press the spindle lockbutton only when the spindle has stopped rotating.
2. Press the spindle lockbutton and hold it in this position.
3.
Release the Kwik lock nut by turning it counterclockwise by hand.
4.
If the Kwik lock nut cannot be released by turning it by hand, use a pin
wrench to turn the nut in a counterclockwise direction.
Never use a pipe wrench! A pipe wrench could damage the
Kwik lock nut.
5. Release the spindle lockbutton and remove the grinding disc.
6.4.5 Fitting a threaded accessory tool
1. Disconnect the mains plug from the power outlet.
2. Screw the accessory tool onto the drive spindle.
3. Press the spindle lockbutton and hold it in this position.
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01