Operating Instruction AG 500-11S (05)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent product protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5M dust hood for grinding (accessory)
- 3.12 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Operation
- 8 Care of the product
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Régulateur électronique de limitation du courant de démarrage
- 3.5 Système électronique de maintien de la vitesse de rotation / Régulateur de vitesse électronique
- 3.6 Active Torque Control (ATC)
- 3.7 Blocage contre toute mise en marche intempestive
- 3.8 Système de protection thermique
- 3.9 Cache avant pour carter de protection
- 3.10 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.11 Capot dépoussiéreur (rainurage) DC-EX 125/5M (accessoire)
- 3.12 Capot dépoussiéreur (tronçonnage) DC-EX 125/5C (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Mise en service
- 6.1 Montage de la poignée latérale
- 6.2 Carter de protection
- 6.3 Montage ou démontage du cache avant
- 6.4 Montage ou démontage des disques
- 6.4.1 Montage du disque à meuler
- 6.4.2 Démontage du disque à meuler
- 6.4.3 Montage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.4 Démontage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.5 Montage de l'outil amovible avec filetage intégré
- 6.4.6 Démontage de l'outil amovible avec filetage intégré
- 6.5 Montage de la brosse métallique
- 6.6 Montage du disque en fibres
- 7 Utilisation
- 8 Entretien du produit
- 9 Transport et entreposage
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Limitación de la corriente de arranque
- 3.5 Electrónica constante/electrónica de regulación del tacómetro
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueo de rearranque
- 3.8 Protección del producto sujeta a la temperatura
- 3.9 Tapa delantera para caperuza protectora
- 3.10 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.11 Protector antipolvo (ranurado) DC-EX 125/5M (accesorios)
- 3.12 Protector antipolvo (tronzado) DC-EX 125/5C (accesorio)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Puesta en servicio
- 6.1 Montaje de la empuñadura lateral
- 6.2 Caperuza protectora
- 6.3 Montaje y desmontaje de la tapa delantera
- 6.4 Montaje y desmontaje de los discos
- 6.4.1 Montaje del disco lijador
- 6.4.2 Desmontaje del disco lijador
- 6.4.3 Montaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.4 Desmontaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.5 Montaje del útil con rosca integrada
- 6.4.6 Desmontaje del útil de inserción con rosca integrada
- 6.5 Montaje del cepillo de alambre
- 6.6 Montaje del disco de fibra
- 7 Manejo
- 8 Cuidado del producto
- 9 Transporte y almacenamiento
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Regulação da corrente de arranque
- 3.5 Velocidade electrónica constante
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueio de arranque
- 3.8 Protecção do produto dependente da temperatura
- 3.9 Tampa dianteira para resguardo de disco
- 3.10 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.11 Dispositivo de extracção de pó (abrir roços) DC-EX 125/5M (acessórios)
- 3.12 Dispositivo de extracção de pó (cortar) DC-EX 125/5C (acessórios)
- 4 Consumíveis
- 5 Características técnicas
- 6 Antes de iniciar a utilização
- 7 Utilização
- 8 Manutenção do produto
- 9 Transporte e armazenamento
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
18 English 2141935
*2141935*
7.1.1 Cutting
▶ When cutting, apply moderate feed pressure and do not tilt the product
or the cutting disc to either side (hold at approx. 90° to the cutting plane).
For best results when cutting profiles and small-section rectangular
tubes, start cutting at the smallest cross section.
7.1.2 Rough grinding
▶ Move the product to and fro while maintaining a 5° to 30° angle of attack
and applying moderate pressure.
➥ This will avoid overheating and discoloration of the workpiece and help
ensure an even surface finish.
7.2 Switching on and off
7.2.1 Switching on
1. Plug the supply cord into the power outlet.
2. Press the rear section of the on/off switch.
3. Slide the on/off switch forward.
4. Lock the on/off switch.
➥ The motor runs.
7.2.2 Switching off
▶ Press the rear section of the on/off switch.
➥ The on/off switch jumps into the off position and the motor stops.
8 Care of the product
DANGER
Electric shock due to breakdown of protective insulation. When working
on metal under extreme conditions, conductive dust may accumulate inside
the power tool, thereby adversely affecting the protective insulation.
▶ Use a stationary dust extraction system when working under extreme
conditions.
▶ Clean the air vents frequently.
▶ Use a ground fault circuit interrupter (GFCI) in the electric power supply
line to the power tool.
WARNING
Electrical hazards. Improper repairs to electrical parts may lead to serious
injuries.
▶ Electrical parts may be repaired only by trained electrical specialists.
▶ Never operate the product when the air vents are blocked. Clean the air
vents carefully using a dry brush. Do not allow foreign objects to enter the
interior of the product.
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01