Operating Instruction AG 500-11S (05)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent product protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5M dust hood for grinding (accessory)
- 3.12 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Operation
- 8 Care of the product
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Régulateur électronique de limitation du courant de démarrage
- 3.5 Système électronique de maintien de la vitesse de rotation / Régulateur de vitesse électronique
- 3.6 Active Torque Control (ATC)
- 3.7 Blocage contre toute mise en marche intempestive
- 3.8 Système de protection thermique
- 3.9 Cache avant pour carter de protection
- 3.10 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.11 Capot dépoussiéreur (rainurage) DC-EX 125/5M (accessoire)
- 3.12 Capot dépoussiéreur (tronçonnage) DC-EX 125/5C (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Mise en service
- 6.1 Montage de la poignée latérale
- 6.2 Carter de protection
- 6.3 Montage ou démontage du cache avant
- 6.4 Montage ou démontage des disques
- 6.4.1 Montage du disque à meuler
- 6.4.2 Démontage du disque à meuler
- 6.4.3 Montage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.4 Démontage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.5 Montage de l'outil amovible avec filetage intégré
- 6.4.6 Démontage de l'outil amovible avec filetage intégré
- 6.5 Montage de la brosse métallique
- 6.6 Montage du disque en fibres
- 7 Utilisation
- 8 Entretien du produit
- 9 Transport et entreposage
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Limitación de la corriente de arranque
- 3.5 Electrónica constante/electrónica de regulación del tacómetro
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueo de rearranque
- 3.8 Protección del producto sujeta a la temperatura
- 3.9 Tapa delantera para caperuza protectora
- 3.10 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.11 Protector antipolvo (ranurado) DC-EX 125/5M (accesorios)
- 3.12 Protector antipolvo (tronzado) DC-EX 125/5C (accesorio)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Puesta en servicio
- 6.1 Montaje de la empuñadura lateral
- 6.2 Caperuza protectora
- 6.3 Montaje y desmontaje de la tapa delantera
- 6.4 Montaje y desmontaje de los discos
- 6.4.1 Montaje del disco lijador
- 6.4.2 Desmontaje del disco lijador
- 6.4.3 Montaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.4 Desmontaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.5 Montaje del útil con rosca integrada
- 6.4.6 Desmontaje del útil de inserción con rosca integrada
- 6.5 Montaje del cepillo de alambre
- 6.6 Montaje del disco de fibra
- 7 Manejo
- 8 Cuidado del producto
- 9 Transporte y almacenamiento
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Regulação da corrente de arranque
- 3.5 Velocidade electrónica constante
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueio de arranque
- 3.8 Protecção do produto dependente da temperatura
- 3.9 Tampa dianteira para resguardo de disco
- 3.10 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.11 Dispositivo de extracção de pó (abrir roços) DC-EX 125/5M (acessórios)
- 3.12 Dispositivo de extracção de pó (cortar) DC-EX 125/5C (acessórios)
- 4 Consumíveis
- 5 Características técnicas
- 6 Antes de iniciar a utilização
- 7 Utilização
- 8 Manutenção do produto
- 9 Transporte e armazenamento
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
*2141935*
2141935 English 3
2 Safety
2.1 General power tool safety warnings
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
Work area safety
▶ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
▶ Do not operate power tools in explosive atmospheres, such as in
the presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
▶ Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
Electrical safety
▶ Power tool plugs must match the outlet. Never modify the plug in any
way. Do not use any adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will reduce risk of electric
shock.
▶ Avoid body contact with earthed or grounded surfaces, such as
pipes, radiators, ranges and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
▶ Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
▶ Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entangled cords increase the risk
of electric shock.
▶ When operating a power tool outdoors, use an extension cord suitable
for outdoor use. Use of a cord suitable for outdoor use reduces the risk
of electric shock.
▶ If operating a power tool in a damp location is unavoidable, use
a residual current device (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
▶ Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in serious personal
injury.
▶ Use personal protective equipment. Always wear eye protection.
Protective equipment such as dust mask, non-skid safety shoes, hard
Printed: 19.10.2018 | Doc-Nr: PUB / 5402266 / 000 / 01