Operating Instruction AG 500-11S (05)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent product protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5M dust hood for grinding (accessory)
- 3.12 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Operation
- 8 Care of the product
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
16 English
3.12 DC-EX 125/5"C dust hood for cutting (accessory)
Use the DC-EX 125/5"C dust hood when cutting masonry and concrete.
CAUTION Use of this hood for working on metal is prohibited.
4 Consumables
Only synthetic resin-bonded, fiber-reinforced discs with a maximum diam-
eter of Ø 5" and a maximum disc thickness of 1/4" (grinding discs) or 1/8"
(cutting discs) which are approved for use at a rotational speed of at least
11,500/min and a peripheral speed of 80 m/s may be used.
WARNING! When cutting or slitting with cutting discs, always use the
standard guard with additional cover plate.
Discs
Application Designation Material
Abrasive cutting disc Cutting, slit-
ting
ACD Metal
Diamond cutting disc Cutting, slit-
ting
DC-TP, DC-D
(SPX, SP, P)
Mineral
Abrasive grinding disc Rough grind-
ing
AG-D, AF-D,
AN-D, AG-D
type 27
Metal
Diamond grinding disc Rough grind-
ing
DG-CW
(SPX, SP, P)
Mineral
Wire brushes Wire brushes 3CS, 4CS,
3SS, 4SS
Metal
Abrasive resin-fiber disc Rough grind-
ing
AP-D Metal
Printed: 19.10.2018 | Doc-Nr: PUB / 5402264 / 000 / 01