Operating Instruction AG 500-12D (04)
Table Of Contents
- Original operating instructions
- 1 Information about the documentation
- 2 Safety
- 3 Description
- 3.1 Overview of the product
- 3.2 Intended use
- 3.3 Items supplied
- 3.4 Starting current limiter
- 3.5 Constant-speed electronics
- 3.6 Active Torque Control (ATC)
- 3.7 Restart interlock
- 3.8 Temperature-dependent motor protection
- 3.9 Front cover for the disc guard
- 3.10 DG-EX 125/5 dust hood for grinding (accessory)
- 3.11 DC-EX 125/5C dust hood for cutting (accessory)
- 4 Consumables
- 5 Technical data
- 6 Before use
- 7 Types of work
- 8 Care and maintenance
- 9 Transport and storage
- 10 Troubleshooting
- 11 Disposal
- 12 Manufacturer’s warranty
- Mode d'emploi original
- 1 Indications relatives à la documentation
- 2 Sécurité
- 3 Description
- 3.1 Vue d'ensemble du produit
- 3.2 Utilisation conforme à l'usage prévu
- 3.3 Éléments livrés
- 3.4 Régulateur électronique de limitation du courant de démarrage
- 3.5 Système électronique de maintien de la vitesse de rotation / Régulateur de vitesse électronique
- 3.6 Active Torque Control (ATC)
- 3.7 Blocage contre toute mise en marche intempestive
- 3.8 Système de protection thermique du moteur
- 3.9 Cache avant pour carter de protection
- 3.10 Capot dépoussiéreur (meulage) DG-EX 125/5 (accessoire)
- 3.11 Capot dépoussiéreur (tronçonnage) DC-EX 125/5C (accessoire)
- 4 Consommables
- 5 Caractéristiques techniques
- 6 Mise en service
- 6.1 Montage de la poignée latérale
- 6.2 Carter de protection
- 6.3 Montage ou démontage du cache avant
- 6.4 Montage ou démontage des disques
- 6.4.1 Montage du disque à meuler
- 6.4.2 Démontage du disque à meuler
- 6.4.3 Montage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.4 Démontage du disque à meuler avec l'écrou à serrage rapide Kwik lock
- 6.4.5 Montage de l'outil amovible avec filetage intégré
- 6.4.6 Démontage de l'outil amovible avec filetage intégré
- 6.5 Montage de la brosse métallique
- 6.6 Montage du disque en fibres
- 7 Travail
- 8 Nettoyage et entretien
- 9 Transport et entreposage
- 10 Aide au dépannage
- 11 Recyclage
- 12 Garantie constructeur
- Manual de instrucciones original
- 1 Información sobre la documentación
- 2 Seguridad
- 3 Descripción
- 3.1 Vista general del producto
- 3.2 Uso conforme a las prescripciones
- 3.3 Suministro
- 3.4 Limitación de la corriente de arranque
- 3.5 Electrónica constante/electrónica de regulación del tacómetro
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueo de rearranque
- 3.8 Protección de la herramienta en función de la temperatura
- 3.9 Tapa delantera para caperuza protectora
- 3.10 Protector antipolvo (lijado) DG-EX 125/5 (accesorios)
- 3.11 Protector antipolvo (tronzado) DC-EX 125/5C (accesorio)
- 4 Material de consumo
- 5 Datos técnicos
- 6 Puesta en servicio
- 6.1 Montaje de la empuñadura lateral
- 6.2 Caperuza protectora
- 6.3 Montaje y desmontaje de la tapa delantera
- 6.4 Montaje y desmontaje de los discos
- 6.4.1 Montaje del disco lijador
- 6.4.2 Desmontaje del disco lijador
- 6.4.3 Montaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.4 Desmontaje del disco lijador con tuerca de apriete rápido Kwik lock
- 6.4.5 Montaje del útil con rosca integrada
- 6.4.6 Desmontaje del útil de inserción con rosca integrada
- 6.5 Montaje del cepillo de alambre
- 6.6 Montaje del disco de fibra
- 7 Procedimiento de trabajo
- 8 Cuidado y mantenimiento
- 9 Transporte y almacenamiento
- 10 Ayuda en caso de averías
- 11 Reciclaje
- 12 Garantía del fabricante
- Manual de instruções original
- 1 Indicações sobre a documentação
- 2 Segurança
- 3 Descrição
- 3.1 Vista geral do produto
- 3.2 Utilização conforme a finalidade projectada
- 3.3 Incluído no fornecimento
- 3.4 Regulação da corrente de arranque
- 3.5 Velocidade electrónica constante
- 3.6 Active Torque Control (ATC)
- 3.7 Bloqueio de arranque
- 3.8 Protecção da ferramenta dependente da temperatura
- 3.9 Tampa dianteira para resguardo de disco
- 3.10 Dispositivo de extracção de pó (rebarbar) DG-EX 125/5 (acessório)
- 3.11 Dispositivo de extracção de pó (cortar) DC-EX 125/5C (acessórios)
- 4 Consumíveis
- 5 Características técnicas
- 6 Antes de iniciar a utilização
- 7 Trabalhar
- 8 Conservação e manutenção
- 9 Transporte e armazenamento
- 10 Ajuda em caso de avarias
- 11 Reciclagem
- 12 Garantia do fabricante
*2143517*
2143517 English 1
1 Information about the documentation
1.1 About this documentation
• Read this documentation before initial operation or use. This is a prerequisite for safe, trouble-free
handling and use of the product.
• Observe the safety instructions and warnings in this documentation and on the product.
• Always keep the operating instructions with the product and make sure that the operating instructions
are with the product when it is given to other persons.
1.2 Explanation of symbols used
1.2.1 Warnings
Warnings alert persons to hazards that occur when handling or using the product. The following signal words
are used:
DANGER
DANGER !
▶ Draws attention to imminent danger that will lead to serious personal injury or fatality.
WARNING
WARNING !
▶ Draws attention to a potential threat of danger that can lead to serious injury or fatality.
CAUTION
CAUTION !
▶
Draws attention to a potentially dangerous situation that could lead to slight personal injury or damage
to the equipment or other property.
1.2.2 Symbols in the documentation
The following symbols are used in this document:
Read the operating instructions before use.
Instructions for use and other useful information
Dealing with recyclable materials
Do not dispose of electric equipment and batteries as household waste
1.2.3 Symbols in the illustrations
The following symbols are used in illustrations:
These numbers refer to the corresponding illustrations found at the beginning of these operating
instructions
The numbering reflects the sequence of operations shown in the illustrations and may deviate
from the steps described in the text
Item reference numbers are used in the overview illustrations and refer to the numbers used in
the product overview section
This symbol is intended to draw special attention to certain points when handling the product.
Wireless data transfer
Printed: 20.04.2018 | Doc-Nr: PUB / 5300553 / 000 / 01